Eric,
The connector on the XV transverter series is DE-9 not DB-15. The
DB-15s will fit the K3 ACC connector.
Yes, the connectors are normally a daisy-chained Y cable for all except
the end devices. but I suppose they could be all single cables going to
a "spider" hub created from Y cables, although it should be tested -
that arrangement may be more prone to noise pickup.
73,
Don W3FPR
eric norris wrote:
> Is there any reason why I can't use a simple Y-cable to extend the cabling from one XV transverter to two? I bought a handful of DB-15 Y-cables from Cable Wholesale (based on a recommendation from this list) and so far they have worked FB I use one DB-15 to split off PR6 control, another for the XV-144, and one for a top-ten band decoder. Any reason why I can't add another when I finish my XV-432 and stack it on top of my XV-144?
>
> 73,
>
> Eric WD6DBM
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.722 / Virus Database: 270.14.123/2592 - Release Date: 12/29/09 02:47:00
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
