k3 sdr-ir pan adapter

[Edward R Cole]

Title is "sdr-ir pan adapter" but Doug states he has a SDR-IQ.  Is this a typo?

Since you have the SDR-IQ, I can address use of it with the K3 (as I
have both radios).  Spectravue only controls the SDR-IQ to my
knowledge.  You can use the SDR-IQ by itself and tune from 500-Hz to
30-MHz, or you can connect it to the K3 IF output and tune the SDR-IQ
to 8.215 MHz to use it with the K3 as a pan adapter.  You tune the K3
via front control panel as normal.  The SDR-IQ can be changed in band
span to cover as much spectrum as desired up to 190-KHz.  Several
demodulation modes are available if you wish to listen to the SDR-IQ
(via your computer soundcard).

I am not familiar with use of SDR-radio.com.

I normally tee the SDR-IQ with the K3 aux Rx input so I can use them
as dual Rx.  I mostly use my SDR-IQ on the 600m band or looking at
the 28-MHz IF from my VHF/UHF/mw transverters.  Recently, I have been
making Sun Noise observations on 1296 MHz with my 16-foot dish using
the SDR-IQ as a spectrum analyzer.

I also use two LP-Pan with my K3 (has the sub-Rx).

73, Ed - KL7UW
http://www.kl7uw.com
[hidden email]
"Kits made by KL7UW"

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html