Elecraft › [K3]

k3

Classic

List

Threaded

4 messages Options

ted-45

k3

Hi Again, I appreciate feed back.I know about EQ adjustment and have set that up some time ago. I want to set audio band width say 100hz at low end and 2800 roll off at high end.That is seperate from EQ settings. I can do that with any other radio, just never checked with this radio.Maybe I didnt explain myself enough when posting With Orion I can set EQ and adjust band width which is seperate. Again many tnx.

Ted wb9jox
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Don Wilhelm-4

Re: k3

Ted,

The LO CUT and HI CUT knobs will do exactly that at the IF, the display
indicates the audio response. The EQ is actually at audio, the
bandwidth is at the IF.
If the knobs are set to SHIFT/WIDTH, just tap either knob and it will
change to LO/HI CUT.

73,
Don W3FPR

ted orant wrote:
> Hi Again, I appreciate feed back.I know about EQ adjustment and have set that up some time ago. I want to set audio band width say 100hz at low end and 2800 roll off at high end.That is seperate from EQ settings. I can do that with any other radio, just never checked with this radio.Maybe I didnt explain myself enough when posting With Orion I can set EQ and adjust band width which is seperate. Again many tnx.
>
>
> Ted wb9jox
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Grant Youngman

Re: k3

In reply to this post by ted-45

ANY other radio?? :-)

Yes, the Orions allow you to set (outside of EQ) both the LF and HF TX
rolloff frequencies. On the other hand -- based on lengthy experience
with a couple of Orions and an Orion II, it doesn't really buy you
much in the overall scheme of things.

Since the K3 transmits through (in normal SSB mode) the 2.8 (or 2.7)
Khz filter, it's likely about where you seem to want it to be. In
ESSB mode, where the radio transmits through the 6Khz filter, you do
have control over the overall TX bandwidth, however you can't
independently set the LF and HF rolloff's in a manner similar to the
Orion. But you can certainly use that feature along with TX EQ to
accomplish about the same thing.

Grant/NQ5T

On Oct 5, 2009, at 10:07 AM, ted orant wrote:

> Hi Again, I appreciate feed back.I know about EQ adjustment and have
> set that up some time ago. I want to set audio band width say 100hz
> at low end and 2800 roll off at high end.That is seperate from EQ
> settings. I can do that with any other radio, just never checked
> with this radio.Maybe I didnt explain myself enough when posting
> With Orion I can set EQ and adjust band width which is seperate.
> Again many tnx.
>
>
> Ted wb9jox
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Greg - AB7R

Re: k3

In reply to this post by ted-45

I "think" Ted is referring to the low freq rolloff for TX. The Orion has a menu item
that allows the user to set the low end and high end for TX.

The K3 has an ESSB menu item if this is what you are looking for. It does require
the use of the 6kHz AM filter. However other than adjusting the TX EQ you cannot set
the lower and upper limits. The ESSB funcion does let you select the TX BW up to I
think 4 kHz (not in front of my radio right now).

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065

On Mon Oct 5 9:04 , Don Wilhelm sent:

>Ted,
>
>The LO CUT and HI CUT knobs will do exactly that at the IF, the display
>indicates the audio response. The EQ is actually at audio, the
>bandwidth is at the IF.
>If the knobs are set to SHIFT/WIDTH, just tap either knob and it will
>change to LO/HI CUT.
>
>73,
>Don W3FPR
>
>ted orant wrote:
>> Hi Again, I appreciate feed back.I know about EQ adjustment and have set that up

some time ago. I want to set audio band width say 100hz at low end and 2800 roll off
at high end.That is seperate from EQ settings. I can do that with any other radio,
just never checked with this radio.Maybe I didnt explain myself enough when posting
With Orion I can set EQ and adjust band width which is seperate. Again many tnx.

>>
>>
>> Ted wb9jox
>>
>>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: [hidden email]','','','')">[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html