k3 transmit problem

[Ai4PF]

I am new to the k3 and this reflector. I must say that I am hugely
impressed with both. I never fully realized 8-pin connectors could vary
so much in their wiring. Come Monday I think I'll invest $20.00 and get
the Kenwood adapter from Heil.
Thanks again to All.
 
Bill Ai4PF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Geoffrey Downs-2]

Bill, save your $20 and just plug the mic, phones and tx/rx switch into the
rear panel jacks as others have suggested :-)

73 to all

Geoff
G3UCK

Original message:


>I am new to the k3 and this reflector. I must say that I am hugely
> impressed with both. I never fully realized 8-pin connectors could vary
> so much in their wiring. Come Monday I think I'll invest $20.00 and get
> the Kenwood adapter from Heil.
> Thanks again to All.
>
> Bill Ai4PF

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Cady, Fred]

To use the rear panel for the mic input, hit Menu to go into the Main
menu and then tune to MIC SEL with VFO B and choose RPL with VFO A. I
think you need to turn bIAS on too (by hitting the #2 key on the
keypad).
Cheers,
KE7X


Fred Cady
fcady at ieee dot org  

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Geoffrey Downs
> Sent: Sunday, February 08, 2009 4:34 AM
> To: bill wade
> Cc: [hidden email]
> Subject: Re: [Elecraft] k3 transmit problem
>
> Bill, save your $20 and just plug the mic, phones and tx/rx
> switch into the
> rear panel jacks as others have suggested :-)
>
> 73 to all
>
> Geoff
> G3UCK
>
> Original message:
>
>
> >I am new to the k3 and this reflector. I must say that I am hugely
> > impressed with both. I never fully realized 8-pin
> connectors could vary
> > so much in their wiring. Come Monday I think I'll invest
> $20.00 and get
> > the Kenwood adapter from Heil.
> > Thanks again to All.
> >
> > Bill Ai4PF
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html