k3s rtty split mode

[NOEL POULIN]

Hello,
I was trying to work in split mode in rtty with the k3s.
K3s says SPL N/A...What am I missing????
Thanks
Noel
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Rich-4]

Your SubRX was not in FSK/RTTY mode.  At least that is what I recall.  I
could be wrong.

Rich


On 2/12/2018 10:17 AM, NOEL POULIN wrote:

> Hello,
> I was trying to work in split mode in rtty with the k3s.
> K3s says SPL N/A...What am I missing????
> Thanks
> Noel
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Cady, Fred-2]

VFO B needs to be on the same band and mode as VFO A.  Double tap A>B and then it should work.

73,

Fred KE7X


For all KE7X Elecraft books, see www.ke7x.com


________________________________
From: [hidden email] <[hidden email]> on behalf of NOEL POULIN <[hidden email]>
Sent: Monday, February 12, 2018 8:17 AM
To: [hidden email]
Subject: [Elecraft] k3s rtty split mode

Hello,
I was trying to work in split mode in rtty with the k3s.
K3s says SPL N/A...What am I missing????
Thanks
Noel
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[iw2noy]

Hello,


the sub receiver is not in the same mode as the first.

Always DOUBLE-TAP A->B until you see on the display "A->B ALL" (copy all
info like mode, bandiwidth and so on... on the VFO B) and only AFTER,
activate the SPLIT.

In this way, you are sure that you VFO B is configured like the first
and ready to work in split mode.

73's de IW2NOY


Il 12/02/2018 16:17, NOEL POULIN ha scritto:

> Hello,
> I was trying to work in split mode in rtty with the k3s.
> K3s says SPL N/A...What am I missing????
> Thanks
> Noel
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]