kat1

[kc5wa]

I finished building my kat1 atu and attempting to install it in my k1.
there is a jumper on "p3" next to the antenna connector that  I believe
needs to be changed to allow the atu to be used but I did not see any
indication to that effect. I'm on page 8 of the atu manual.  any help on
this is appreciated
thanks de "rc" kc5wa

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Craig Rairdin]

The jumper on P3 should be in the KAT1 position when the KAT1 is in use.
This is in the errata for page 7 of the KAT1 instructions.

Craig
K1 #1966

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Robert Conley
Sent: Thursday, March 24, 2005 10:36 AM
To: elecraft@Elecraft List
Subject: [Elecraft] kat1


I finished building my kat1 atu and attempting to install it in my k1.
there is a jumper on "p3" next to the antenna connector that  I believe
needs to be changed to allow the atu to be used but I did not see any
indication to that effect. I'm on page 8 of the atu manual.  any help on
this is appreciated
thanks de "rc" kc5wa

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com