kat500 Config rev 1.13.5.12

[RICHH]

Hello everyone
      Does anyone know for the KAT500 how to access the Initial Power tab
in the edit config menu.    The utlity version is rev 1.13.5.12
Does not show up.   Thanks Richard
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

It may require you to install the KAT500 firmware version that supports this function. See firmware release notes.  

Dick, K6KR

Sent from my iPhone

On Sep 15, 2013, at 11:26 AM, "rdonner @dslextreme.com" <[hidden email]> wrote:

> Hello everyone
>      Does anyone know for the KAT500 how to access the Initial Power tab
> in the edit config menu.    The utlity version is rev 1.13.5.12
> Does not show up.   Thanks Richard
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

This function requires KAT500 firmware 01.41, available from
ftp://ftp.elecraft.com/KAT500/firmware/beta

I should have said that in KAT500 Utility Help.  I'll fix that.

73 de Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Dick Dievendorff
Sent: Sunday, September 15, 2013 11:30 AM
To: rdonner @dslextreme.com
Cc: [hidden email]
Subject: Re: [Elecraft] kat500 Config rev 1.13.5.12

It may require you to install the KAT500 firmware version that supports this
function. See firmware release notes.  

Dick, K6KR

Sent from my iPhone

On Sep 15, 2013, at 11:26 AM, "rdonner @dslextreme.com"
<[hidden email]> wrote:

> Hello everyone
>      Does anyone know for the KAT500 how to access the Initial Power tab
> in the edit config menu.    The utlity version is rev 1.13.5.12
> Does not show up.   Thanks Richard
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html