key out port

[Shel Sherman-2]

I cannot get the key out port to pull to ground using the internal keyer  I
have no gate signal change when pulsing the keyer  I cannot find the
schematic so I can trace back to the keyer outlying order to find the break
 help appreciated  call 314/580/3566

Shel Sherman. Wo0c
--
Shel Sherman
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Shel,

It seems the K3 schematics have disappeared from the Elecraft website,
but the K3S schematics are listed - and should be adequate for that problem.

I do have the K3 schematics, and if that will help, send me a private
email (take Elecraft out of the subject line) and I can send the file to
you - The reflector does not allow attachments.

73,
Don W3FPR

On 3/8/2018 8:36 AM, Shel Sherman wrote:
> I cannot get the key out port to pull to ground using the internal keyer  I
> have no gate signal change when pulsing the keyer  I cannot find the
> schematic so I can trace back to the keyer outlying order to find the break
>   help appreciated  call 314/580/3566
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Grant Youngman-2]

There are K3 schematics at http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf <http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf>

Some of the modules in this package are a bit out of date (later than 2010), so the K3S docs may be needed, too, depending …

Grant NQ5T
K3 #2091, KX3 #8342



On Mar 8, 2018, at 10:57 AM, Don Wilhelm <[hidden email]> wrote:

>
> Shel,
>
> It seems the K3 schematics have disappeared from the Elecraft website, but the K3S schematics are listed - and should be adequate for that problem.
>
> I do have the K3 schematics, and if that will help, send me a private email (take Elecraft out of the subject line) and I can send the file to you - The reflector does not allow attachments.
>
> 73,
> Don W3FPR
>
> On 3/8/2018 8:36 AM, Shel Sherman wrote:
>> I cannot get the key out port to pull to ground using the internal keyer  I
>> have no gate signal change when pulsing the keyer  I cannot find the
>> schematic so I can trace back to the keyer outlying order to find the break
>>  help appreciated  call 314/580/3566
> ______________________________________________________________
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Joe Subich, W4TV-4]

The K3 schematics are on the web site:
   http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf


73,

    ... Joe, W4TV


On 3/8/2018 10:57 AM, Don Wilhelm wrote:

> Shel,
>
> It seems the K3 schematics have disappeared from the Elecraft website,
> but the K3S schematics are listed - and should be adequate for that
> problem.
>
> I do have the K3 schematics, and if that will help, send me a private
> email (take Elecraft out of the subject line) and I can send the file to
> you - The reflector does not allow attachments.
>
> 73,
> Don W3FPR
>
> On 3/8/2018 8:36 AM, Shel Sherman wrote:
>> I cannot get the key out port to pull to ground using the internal
>> keyer  I
>> have no gate signal change when pulsing the keyer  I cannot find the
>> schematic so I can trace back to the keyer outlying order to find the
>> break
>>   help appreciated  call 314/580/3566
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[ke9uw]

http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf

Chuck Jack

Sent from my iPhone, cjack

On Mar 8, 2018, at 10:18 AM, Don Wilhelm <[hidden email]<mailto:[hidden email]>> wrote:

Shel,

It seems the K3 schematics have disappeared from the Elecraft website, but the K3S schematics are listed - and should be adequate for that problem.

I do have the K3 schematics, and if that will help, send me a private email (take Elecraft out of the subject line) and I can send the file to you - The reflector does not allow attachments.

73,
Don W3FPR

On 3/8/2018 8:36 AM, Shel Sherman wrote:
I cannot get the key out port to pull to ground using the internal keyer  I
have no gate signal change when pulsing the keyer  I cannot find the
schematic so I can trace back to the keyer outlying order to find the break
 help appreciated  call 314/580/3566
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]<mailto:[hidden email]>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]