kio2 aux i/o module

[Rolf Jansson]

Hello , just finished my koi2 module for my k2 with rev 2.4p 1.09

Can  I finished it by follow the instructions in the manual rev b july 16
regarding the control board

cut trace and jumper

 

73 Rolf

SM2MZC

 

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Rolf,

Read the manual carefully.  That change is ONLY to be done if your K2
serial number is less than 3000.
SN 3000 and above already have the changes on the Control Board.

73,
Don W3FPR

Rolf Jansson wrote:
> Hello , just finished my koi2 module for my k2 with rev 2.4p 1.09
>
> Can  I finished it by follow the instructions in the manual rev b july 16
> regarding the control board
>
> cut trace and jumper
>
>  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html