kpa-500

[William H. Droeger, Jr.]

      Hello- I have a k3/10 and wonder if anybody field testing a  
Kpa-500 knows how much power out the amp will get with 10 watts of  
drive.  Please advise off reflector. Thanks-Skip KT9T
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Phil Salas]

"...I have a k3/10 and wonder if anybody field testing a  Kpa-500 knows how
much power out the amp will get with 10 watts of  drive...."

10 watts drive gives about 170 watts out - give or take 5 watts or so.

Phil - AD5X

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Leroy]

Is the KPA 500 going to be K2 compatible ?

                                                       Roy AB7CE
-----Original Message-----
From: Phil & Debbie Salas
Sent: Monday, February 21, 2011 6:21 PM
To: [hidden email]
Subject: Re: [Elecraft] kpa-500

"...I have a k3/10 and wonder if anybody field testing a  Kpa-500 knows how
much power out the amp will get with 10 watts of  drive...."

10 watts drive gives about 170 watts out - give or take 5 watts or so.

Phil - AD5X

______________________________________________________________\


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Robert Friess]

The KPA500 is compatible with virtually any transceiver including, of
course, the K2.

Bob, N6CM

On Mon, Feb 21, 2011 at 5:54 PM, Leroy Marion <[hidden email]> wrote:

> Is the KPA 500 going to be K2 compatible ?
>
>                                                       Roy AB7CE
> -----Original Message-----
> From: Phil & Debbie Salas
> Sent: Monday, February 21, 2011 6:21 PM
> To: [hidden email]
> Subject: Re: [Elecraft] kpa-500
>
> "...I have a k3/10 and wonder if anybody field testing a  Kpa-500 knows how
> much power out the amp will get with 10 watts of  drive...."
>
> 10 watts drive gives about 170 watts out - give or take 5 watts or so.
>
> Phil - AD5X
>
> ______________________________________________________________\
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html