kpa500 cable

[NOEL POULIN]

I am wiring a new cable for THE KPA500 FOR THE K3S
Here are the pins I am using on a db15

2,3,4(NC),5,9 11,12,13,14
I am not using pin10 ....keying the kpa ....with an rca cable
I am not using pin 15... ALC
I would like to know if my setting is ok.....like this
Thanks
NOel



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jack Brindle-2]

Page 18 of the KPA500 manual contains a table with the connections you need to make (and the pins you shouldn’t connect).

If you see conflicts with the DIGOUT1 causing the KPA500 to be disabled you may wish to remove the pin 11 connection.

73,

- Jack, W6FB

> On Nov 22, 2016, at 9:37 AM, NOEL POULIN <[hidden email]> wrote:
>
> I am wiring a new cable for THE KPA500 FOR THE K3S
> Here are the pins I am using on a db15
>
> 2,3,4(NC),5,9 11,12,13,14
> I am not using pin10 ....keying the kpa ....with an rca cable
> I am not using pin 15... ALC
> I would like to know if my setting is ok.....like this
> Thanks
> NOel
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]