kpa500

[Ron Leech]

looking for help with my kpa 500 getting a MCU LOAD fault I cant find the fault code in the manual I got the fault using 110v and 220v. amp is in a remote location and is hard to get to in the winter.It must be un plugged then plugged back in and all is ok ( for a wile) thanks 73. ve7nex Ron Leech.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff-4]

This message indicates that the KPA500 is waiting for firmware. Try loading firmware with the KPA Utility

73 de Dick, K6KR

Sent from my iPhone

> On Dec 7, 2013, at 16:34, "ve7nex  Ron Leech" <[hidden email]> wrote:
>
> looking for help with my kpa 500 getting a MCU LOAD fault I cant find the fault code in the manual I got the fault using 110v and 220v. amp is in a remote location and is hard to get to in the winter.It must be un plugged then plugged back in and all is ok ( for a wile) thanks 73. ve7nex Ron Leech.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html