Too much rum and eggnog for me; I forgot there was a separate dl utilty for the KRC2..it's been a couple years since I last updated it!
Thanks for the reminder :).. it now seems fine.
73, KC0VKN
On 29 Dec 14:12, Rich wrote:
> I have seen this on my KRC2 and the only way I have been able to fix
> it is to reload the firmware. I am not sure what causes the
> problem, however I have two of these units. One of them has never
> had this problem while the other one acts up every couple months.
>
> Rich
> On 12/29/2014 1:02 PM, Joe Hetrick wrote:
> >Something happened to my KRC2 between yesterday and today.
> >
> >Power-up this morning, LED flashes. I tried to fire it up ith the 2.1.7 Config Util; whatever state the LED is in, on or off, persists if I check for the KRC2 ( but one is never found )-- eg if the LED happens to be blinking ON, kit stays on as soon as the query starts; if it's off, it stays off.
> >
> >Any ideas?
> >
> >73,
> >
> >Joe KC0VKN
> >
> >
--
Joe Hetrick
perl -e 'print pack(h*,a6865647279636b604269647a616e69647f627e2e65647a0)'
BOFH Excuse: Please state the nature of the technical emergency
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
