kxv3 output question

[Jim Rhodes-2]

Can someone tell me the output range of freq for 10 meter if and power
output level. Using the "a" version.

Jim Rhodes
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Jim,

The power level can be set up to 120mW.
The frequency range is about 2MHz.  I recall that initially the internal
2 meter transceiver design was to be for a 50MHz IF, but was later
changed to a 28MHz IF which required switching between 2 crystals to
cover the entire 2 meter band.
That is a limitation imposed by the 10 meter bandpass filters.

If that information is not correct, I am certain that someone at
Elecraft will provide corrections.

73,
Don W3FPR

On 9/11/2017 2:36 PM, Jim Rhodes wrote:
> Can someone tell me the output range of freq for 10 meter if and power
> output level. Using the "a" version.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Jim Rhodes-2]

Actually looking at a different brand of transferred for satellite and
terrestrial work both. The transferred list says 28-32 for the XV432 was
wondering if it would go any higher in freq.

Jim Rhodes

On Sep 11, 2017 2:20 PM, "Don Wilhelm" <[hidden email]> wrote:

> Jim,
>
> The power level can be set up to 120mW.
> The frequency range is about 2MHz.  I recall that initially the internal 2
> meter transceiver design was to be for a 50MHz IF, but was later changed to
> a 28MHz IF which required switching between 2 crystals to cover the entire
> 2 meter band.
> That is a limitation imposed by the 10 meter bandpass filters.
>
> If that information is not correct, I am certain that someone at Elecraft
> will provide corrections.
>
> 73,
> Don W3FPR
>
> On 9/11/2017 2:36 PM, Jim Rhodes wrote:
>
>> Can someone tell me the output range of freq for 10 meter if and power
>> output level. Using the "a" version.
>>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]