line in and out
Locked
 
|
Hi, Anyone else also having problems with the Microham K3 cable? Mine does with the line-in line-out jacks, they don't make a good contact. Is there a difference between 3,5 mm jacks and the US equivalent? vy 73 Eric PA3CEV -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.20.9/1292 - Release Date: 21-2-2008 16:09 _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Hi Eric. I have an MK2R+. No problems with the connctors here.
73 Greg AB7R -----Original Message----- From: [hidden email] [mailto:[hidden email]]On Behalf Of Eric Sent: Friday, February 22, 2008 1:21 PM To: [hidden email] Subject: [Elecraft] line in and out Hi, Anyone else also having problems with the Microham K3 cable? Mine does with the line-in line-out jacks, they don't make a good contact. Is there a difference between 3,5 mm jacks and the US equivalent? vy 73 Eric PA3CEV -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.20.9/1292 - Release Date: 21-2-2008 16:09 _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.20.9/1293 - Release Date: 2/22/2008 9:21 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.21.0/1296 - Release Date: 2/24/2008 12:19 PM _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Mine work ok too (DigiKeyer), only comment is that they are labeld as if
coming from a Pc, therefore PC IN goes into the Line Out on the K3 etc. On 25/02/2008 04:41, "AB7R" <[hidden email]> sent: > Hi Eric. I have an MK2R+. No problems with the connctors here. > -----Original Message----- > Anyone else also having problems with the Microham K3 cable? Mine > does with the line-in line-out jacks, they don't make a good contact. > > Is there a difference between 3,5 mm jacks and the US equivalent? > > vy 73 Eric PA3CEV -- One glance at a book and you hear the voice of another person, perhaps someone dead for 1,000 years. To read is to voyage through time. -Carl Sagan, astronomer and writer (1934-1996) _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Is anyone at Elecraft already thinking about redesigning XV to the K3XV look? Maybe bigger footprint, more then one XV in that enclosure? Personally I'd like to have a K3XV144/432, having that I could sell my TS2000 :-) Eric PA3CEV -- No virus found in this outgoing message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.21.8/1339 - Release Date: 22-3-2008 16:43 _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Eric:
That is a great idea. I would buy one Gregg W6IZT -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Eric Sent: Sunday, March 23, 2008 1:36 PM To: [hidden email] Subject: [Elecraft] K3 transverter design Is anyone at Elecraft already thinking about redesigning XV to the K3XV look? Maybe bigger footprint, more then one XV in that enclosure? Personally I'd like to have a K3XV144/432, having that I could sell my TS2000 :-) Eric PA3CEV -- No virus found in this outgoing message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.21.8/1339 - Release Date: 22-3-2008 16:43 _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
In reply to this post by Eric-232
On Sun, 23 Mar 2008 18:35:35 +0100, you wrote:
> > >Is anyone at Elecraft already thinking about redesigning XV to the K3XV look? > >Maybe bigger footprint, more then one XV in that enclosure? > >Personally I'd like to have a K3XV144/432, having that I could sell >my TS2000 :-) > >Eric PA3CEV You don't need but one interface. All Elecraft XVTRS have the ability to be daisy chained so that the control of each can be from the same connector. Go to the web site and download the K3 manual and the one of the XVTR manuals to see how it is done. Tom, N5GE - SWOT 3537 - Grid EM12jq "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." --Benjamin Franklin 1775 Support the entire Constitution, not just the parts you like. http://www.n5ge.com http://www.eQSL.cc/Member.cfm?N5GE _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Amateur Radio Operator N5GE
|
|
|
In reply to this post by Eric-232
On Sun, 23 Mar 2008 18:35:35 +0100, you wrote:
> > >Is anyone at Elecraft already thinking about redesigning XV to the K3XV look? > >Maybe bigger footprint, more then one XV in that enclosure? > >Personally I'd like to have a K3XV144/432, having that I could sell >my TS2000 :-) > >Eric PA3CEV Boy, did I completely read the post wrong or what ??????? Tom, N5GE - SWOT 3537 - Grid EM12jq "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." --Benjamin Franklin 1775 Support the entire Constitution, not just the parts you like. http://www.n5ge.com http://www.eQSL.cc/Member.cfm?N5GE _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Amateur Radio Operator N5GE
|
|
|
In reply to this post by Gregg W6IZT
count me in too!
-----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Gregg W6IZT Sent: Sunday, March 23, 2008 2:13 PM To: 'Eric'; [hidden email] Subject: RE: [Elecraft] K3 transverter design Eric: That is a great idea. I would buy one Gregg W6IZT -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Eric Sent: Sunday, March 23, 2008 1:36 PM To: [hidden email] Subject: [Elecraft] K3 transverter design Is anyone at Elecraft already thinking about redesigning XV to the K3XV look? Maybe bigger footprint, more then one XV in that enclosure? Personally I'd like to have a K3XV144/432, having that I could sell my TS2000 :-) Eric PA3CEV -- No virus found in this outgoing message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.21.8/1339 - Release Date: 22-3-2008 16:43 _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ------------------------------------------------------------ This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain information that is proprietary, confidential, and exempt from disclosure under applicable law. Any unauthorized review, use, disclosure, or distribution is prohibited. If you have received this email in error please notify the sender by return email and delete the original message. Please note, the recipient should check this email and any attachments for the presence of viruses. The organization accepts no liability for any damage caused by any virus transmitted by this email. ================================= _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
Re: K3 transverter design
|
|
In reply to this post by Gregg W6IZT
Perhaps a cabinet could be done by a third party?
Maybe end plates for stacking two, three or four XV's (if Elecraft ever comes up with an XV1200, or for those who might have a 4M conversion), and repainted and relabeled front and rear panels, with fillers between them. Or a full cabinet that used the XV boards, and the extra width for cooling. 73, doug From: "Gregg W6IZT" <[hidden email]> Date: Sun, 23 Mar 2008 14:13:14 -0400 Eric: That is a great idea. I would buy one Gregg W6IZT -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Eric Sent: Sunday, March 23, 2008 1:36 PM To: [hidden email] Subject: [Elecraft] K3 transverter design Is anyone at Elecraft already thinking about redesigning XV to the K3XV look? Maybe bigger footprint, more then one XV in that enclosure? Personally I'd like to have a K3XV144/432, having that I could sell my TS2000 :-) Eric PA3CEV _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
Re: K3 transverter design
|
|
In reply to this post by wb2ssb
Me three! (or whatever the count is now.)
Bill W5WVO Sanger, Joseph wrote: > count me in too! > > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]] On Behalf Of Gregg W6IZT > Sent: Sunday, March 23, 2008 2:13 PM > To: 'Eric'; [hidden email] > Subject: RE: [Elecraft] K3 transverter design > > Eric: > > That is a great idea. I would buy one > > Gregg > W6IZT > > -----Original Message----- > From: [hidden email] > [mailto:[hidden email]] On Behalf Of Eric > Sent: Sunday, March 23, 2008 1:36 PM > To: [hidden email] > Subject: [Elecraft] K3 transverter design > > > > Is anyone at Elecraft already thinking about redesigning XV to the > K3XV look? > > Maybe bigger footprint, more then one XV in that enclosure? > > Personally I'd like to have a K3XV144/432, having that I could sell > my TS2000 :-) > > Eric PA3CEV Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by Doug Faunt N6TQS +1-510-655-8604
Hi Seems I lost my 200 Hz filter after the update. In config the filter is ON, everything looks OK, but al sigs are lost when FL5 kicks in when turning WIDTH. Anyone else having this problem too? Or did I win the RTFM contest today? vy 73 Eric PA3CEV -- No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.23.8/1413 - Release Date: 3-5-2008 11:22 _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
Administrator
|
Hi Eric,
This should not have happened. You may need to re-set the filter's center frequency using the FL5 FRQ menu entry. Typically the 200-Hz filter has an offset of around -0.90 kHz. Also make sure that FL5 BW is set to 0.20, and that you have REFCAL properly calibrated against a reference signal. 73, Wayne N6KR On May 4, 2008, at 10:00 AM, Eric wrote: > Seems I lost my 200 Hz filter after the update. In config the filter > is ON, everything looks OK, but al sigs are lost when FL5 kicks in > when turning WIDTH. --- http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by Eric-232
At 19:06 4-5-2008, you wrote:
>Hi Eric, > >This should not have happened. You may need to re-set the filter's >center frequency using the FL5 FRQ menu entry. Typically the 200-Hz >filter has an offset of around -0.90 kHz. > >Also make sure that FL5 BW is set to 0.20, and that you have REFCAL >properly calibrated against a reference signal. Hi Wayne, After some filter swapping, it looks like the 200 Hz filter is dead. It wasn't during the ARRL CW test, last time I used it, so I guess it's a coincidence and has no connection with the software changes. vy 73 Eric PA3CEV PS: no visual problems on the 200 Hz board, all leads are clipped short etc. Anything I could do myself? -- No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.23.8/1413 - Release Date: 3-5-2008 11:22 _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by wayne burdick
Sorry Wayne, I meant to send this to the list.
Has the method "3" been implemented for frequency calibration yet? Stan Rife W5EWA Houston, TX K2 SN 4216 K3 SN 0690 wayne burdick wrote: > Hi Eric, > > This should not have happened. You may need to re-set the filter's > center frequency using the FL5 FRQ menu entry. Typically the 200-Hz > filter has an offset of around -0.90 kHz. > > Also make sure that FL5 BW is set to 0.20, and that you have REFCAL > properly calibrated against a reference signal. > > 73, > Wayne > N6KR > > On May 4, 2008, at 10:00 AM, Eric wrote: > >> Seems I lost my 200 Hz filter after the update. In config the filter >> is ON, everything looks OK, but al sigs are lost when FL5 kicks in >> when turning WIDTH. > > --- > > http://www.elecraft.com > > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |