line out question

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

line out question

Jeffrey Otterson
Hi,

I do not have a sub-receiver in my K3.

Is there any way to send the main receiver audio to the left and right
outputs on the line out jack?

Some times I "patch" my computer soundcards together to send the K3 audio
into an amplifier and stereo speakers, but I only get one channel, the left
(I think).

Does anybody have any ideas around this?

Thanks,

Jeff / N1KDO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: line out question

Don Wilhelm-4
Jeff,

If you must use Line Out ...
Rather than a mod to the K3, May I suggest you build a special cable.  
At the K3 end connect a stereo plug, but with both conductors connected
to the tip - the shield still goes to the shell.

Alternately, connect to the Speaker Output jack instead of Line Out and
you can have the AFX effects available.  With no subRX, the audio is
routed to both the left and right channels of the SPKR output is you
have Speakers = 2 set in the menu.

73,
Don W3FPR

On 10/24/2011 3:37 PM, Jeffrey Otterson wrote:

> Hi,
>
> I do not have a sub-receiver in my K3.
>
> Is there any way to send the main receiver audio to the left and right
> outputs on the line out jack?
>
> Some times I "patch" my computer soundcards together to send the K3 audio
> into an amplifier and stereo speakers, but I only get one channel, the left
> (I think).
>
> Does anybody have any ideas around this?
>
> Thanks,
>
> Jeff / N1KDO
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: line out question

Phil LaMarche-2
That works very well.  I go from the Spkr jack to a Radio Shack amplifier
that goes to two stereo speakers mounted on the wall and pointed at me.
Wonderful audio.  I've done this with all my radios for over 10 years.

Phil

Philip LaMarche
 
LaMarche Enterprises, Inc

[hidden email]
www.LaMarcheEnterprises.com  
 
727-944-3226
727-937-8834 Fax
727-510-5038 Cell 
 www.w9dvm.com
K3 # 1605
KPA500 # 029
P3 #1480

 CCA 98-00827
CRA 1701
W9DVM
 


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Don Wilhelm
Sent: Monday, October 24, 2011 4:00 PM
To: [hidden email]
Subject: Re: [Elecraft] line out question

Jeff,

If you must use Line Out ...
Rather than a mod to the K3, May I suggest you build a special cable.  
At the K3 end connect a stereo plug, but with both conductors connected to
the tip - the shield still goes to the shell.

Alternately, connect to the Speaker Output jack instead of Line Out and you
can have the AFX effects available.  With no subRX, the audio is routed to
both the left and right channels of the SPKR output is you have Speakers = 2
set in the menu.

73,
Don W3FPR

On 10/24/2011 3:37 PM, Jeffrey Otterson wrote:

> Hi,
>
> I do not have a sub-receiver in my K3.
>
> Is there any way to send the main receiver audio to the left and right
> outputs on the line out jack?
>
> Some times I "patch" my computer soundcards together to send the K3
> audio into an amplifier and stereo speakers, but I only get one
> channel, the left (I think).
>
> Does anybody have any ideas around this?
>
> Thanks,
>
> Jeff / N1KDO
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html