looking for a open source waterfall/pabadepter display for the KX3. any ideas

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

looking for a open source waterfall/pabadepter display for the KX3. any ideas

va3bxg

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: looking for a open source waterfall/pabadepter display for the KX3. any ideas

Jussi Eloranta
Hi,

 > looking for a open source waterfall/pabadepter display for the KX3.
any ideas

Haven't gotten my kx3 yet so can't say for sure that the following will
work but most likely:

- quisk (win/linux/mac; http://james.ahlstrom.name/quisk/; not sure if
rig control works). It takes general I/Q in and can make the waterfall etc.
- kcomm ( http://www.g4ilo.com/kcomm.html; supports win & linux but
should also compile on macs; supports k3 rig control which should work
with kx3). This has waterfall display among other things.

I am sure there are others (windoze only) but don't know much about
them... some might even run under wine on other platforms. I recall that
there is a list of useful software on Elecraft web pages somewhere.

Jussi Eloranta
AA6KJ

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: looking for a open source waterfall/pabadepter display for the KX3. any ideas

Barry K3NDM
I think I would try PowerSDR-IQ. It has all sorts of handy capabilities.
It will take the I and Q data from any source. There is a DLL that will
allow it to interface with the K3. Therefore, I'm guessing that it
should work with the KX3.

73,
Barry
K3NDM

On 4/25/2012 3:42 PM, Jussi Eloranta wrote:

> Hi,
>
>   >  looking for a open source waterfall/pabadepter display for the KX3.
> any ideas
>
> Haven't gotten my kx3 yet so can't say for sure that the following will
> work but most likely:
>
> - quisk (win/linux/mac; http://james.ahlstrom.name/quisk/; not sure if
> rig control works). It takes general I/Q in and can make the waterfall etc.
> - kcomm ( http://www.g4ilo.com/kcomm.html; supports win&  linux but
> should also compile on macs; supports k3 rig control which should work
> with kx3). This has waterfall display among other things.
>
> I am sure there are others (windoze only) but don't know much about
> them... some might even run under wine on other platforms. I recall that
> there is a list of useful software on Elecraft web pages somewhere.
>
> Jussi Eloranta
> AA6KJ
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: looking for a open source waterfall/pabadepter display for the KX3. any ideas

Don Wilhelm-4
Actually NaP3 works better and removes a lot of the clutter from the
Flex origins of PSDR-IQ, and it is still being improved.  It was written
for the K3, but will work with th eKX3 with a few exceptions.
Take a look at the LP-Pan Yahoo group for a lot more discussion.

73,
Don W3FPR

On 4/25/2012 4:03 PM, Barry LaZar wrote:

> I think I would try PowerSDR-IQ. It has all sorts of handy capabilities.
> It will take the I and Q data from any source. There is a DLL that will
> allow it to interface with the K3. Therefore, I'm guessing that it
> should work with the KX3.
>
> 73,
> Barry
> K3NDM
>
> On 4/25/2012 3:42 PM, Jussi Eloranta wrote:
>> Hi,
>>
>>    >   looking for a open source waterfall/pabadepter display for the KX3.
>> any ideas
>>
>> Haven't gotten my kx3 yet so can't say for sure that the following will
>> work but most likely:
>>
>> - quisk (win/linux/mac; http://james.ahlstrom.name/quisk/; not sure if
>> rig control works). It takes general I/Q in and can make the waterfall etc.
>> - kcomm ( http://www.g4ilo.com/kcomm.html; supports win&   linux but
>> should also compile on macs; supports k3 rig control which should work
>> with kx3). This has waterfall display among other things.
>>
>> I am sure there are others (windoze only) but don't know much about
>> them... some might even run under wine on other platforms. I recall that
>> there is a list of useful software on Elecraft web pages somewhere.
>>
>> Jussi Eloranta
>> AA6KJ
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: looking for a open source waterfall/pabadepter display for the KX3. any ideas

Tony Estep
In reply to this post by Jussi Eloranta
On Wed, Apr 25, 2012 at 2:42 PM, Jussi Eloranta <[hidden email]>wrote:

> ...- quisk...- kcomm...

===============
In addition to the Linux programs that Jussi mentions there is at least one
open-source for Windows that I can think of, SDR# (http://sdrsharp.com/). I
haven't used it but it has gotten good commentary from those who have.

good luck,
Tony KT0NY




--
http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: looking for a open source waterfall/pabadepter display for the KX3. any ideas

Leigh L. Klotz Jr WA5ZNU
Administrator
In reply to this post by va3bxg
You might be interested in my Cascata project. http://wa5znu.org/2011/07/cascata/

Leigh/WA5ZNU
P.S. I'm also a quisk contributor.