low power on SSB

[Dennis Teal]

After doing most recent firmware update —CW gives normal out put but low out pout on SSB using mic. Suspect a setting is wrong any ideas??


Dennis Teal, D.C.
[hidden email]

E-mail Confidentially Notice

The documents accompanying this e-mail contain confidential and protected health information from the offices of Dennis Teal, D.C. 582 Teal Run Livingston, Texas 77351. This information is intended to be for the use of the individual or entity named in this e-mail. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of e-mail is prohibited. If you received this e-mail in error, please notify us by telephone at 936-327-5572 immediately. Please return or destroy any e-mail received in error.




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Bob McGraw - K4TAX]

Perhaps the update set the mike gain from the MIC SEL menu from the high
gain to the low gain value.  See MIC SEL on page 55 of the manual.

73
Bob, K4TAX

On 11/1/2015 3:07 PM, Dennis Teal wrote:
> After doing most recent firmware update —CW gives normal out put but low out pout on SSB using mic. Suspect a setting is wrong any ideas??


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]