mating K3 to 9500

[Dick Hanson]

Hello....
I've not found any hints in archives on this, so wondering if anyone here
has done this?
If so, cabling and any other handy hints would be appreciated.
I would much rather have the amp follow the radio thru commands and not via
RF sensing.
Thanks.
73
Dick, K5AND
Austin

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[W0FK]

I didn't look into trying to interconnect the 9500 and the K3 to get band data. All it takes is an RCA patch cord between the relay out and in plugs on both units, and away you go. The RF sensing is very fast on the 9500 and pretty painless.

73,

Lou, W0FK

Dick Hanson wrote

Hello....
I've not found any hints in archives on this, so wondering if anyone here
has done this?
If so, cabling and any other handy hints would be appreciated.
I would much rather have the amp follow the radio thru commands and not via
RF sensing.
Thanks.
73
Dick, K5AND
Austin

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html