mcu load error

[km5ps]

I hit the wrong button on mcu ld .  mcu load stopped before it was
done.  How can I correct this problem.  K3 now blinks red tx light and
lcd screen is dark with mcu ld on the screen.  How can I get k3 back up
and running with my backup files of the firmware.  First off need to get
k3 back on as usual.  Any help please!!

km5ps
john
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[AC7AC]

CONTENTS DELETED

The author has deleted this message.

[Don Wilhelm-4]

  John,

Follow the instructions to force a firmware load - it can be found in
the K3 manual and/or in the K3Utility help file.

73,
Don W3FPR

On 6/12/2011 10:13 PM, km5ps wrote:

> I hit the wrong button on mcu ld .  mcu load stopped before it was
> done.  How can I correct this problem.  K3 now blinks red tx light and
> lcd screen is dark with mcu ld on the screen.  How can I get k3 back up
> and running with my backup files of the firmware.  First off need to get
> k3 back on as usual.  Any help please!!
>
> km5ps
> john
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

There's a section in K3 Utility Help, Troubleshooting MCU load error, that
describes the exact steps you should do at this point.

Let me know if this doesn't work for you!

73 de Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of km5ps
Sent: Sunday, June 12, 2011 7:13 PM
To: [hidden email]
Subject: [Elecraft] mcu load error

I hit the wrong button on mcu ld .  mcu load stopped before it was done.
How can I correct this problem.  K3 now blinks red tx light and lcd screen
is dark with mcu ld on the screen.  How can I get k3 back up and running
with my backup files of the firmware.  First off need to get
k3 back on as usual.  Any help please!!

km5ps
john
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html