message HIGH CURRENT after new firmware installation

[IK4EWX]

Some day ago I installed the new firmware version.
Immediately after installation  has returned the message on display of "high
current" when keying with my well setted bugs, a Vibroplex Presentation and
a Begali Intrepid.  
Regular transmission, 100w out, but appear this message that I have seen in
the past when I bought the K3S but have been solved same firmware release
ago.
Do Elecraft have changed the alarm intervention with this new release?
Ian IK4EWX




--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[HK3J]

I have the same problem with my K3s. When I put the subreceiver, it
immediately appears  HI CURR in the display. I checked the user manual and
said that 2 speakers must be set up because otherwise the transceiver will
be shorted. I have configured it with 1 speaker and 2 speakers and HI CURR
always appears. Who can help me with a solution to this problem? Sincerely,
Germán Durán

El vie., 14 dic. 2018, 9:58 a.m., IK4EWX <[hidden email]> escribió:

> Some day ago I installed the new firmware version.
> Immediately after installation  has returned the message on display of
> "high
> current" when keying with my well setted bugs, a Vibroplex Presentation and
> a Begali Intrepid.
> Regular transmission, 100w out, but appear this message that I have seen in
> the past when I bought the K3S but have been solved same firmware release
> ago.
> Do Elecraft have changed the alarm intervention with this new release?
> Ian IK4EWX
>
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

German,

Does Hi CURR appear in receive, or only when you transmit?
That message has no relationship with the speakers.

73,
Don W3FPR

On 12/21/2018 11:41 AM, German Duran wrote:
> I have the same problem with my K3s. When I put the subreceiver, it
> immediately appears  HI CURR in the display. I checked the user manual and
> said that 2 speakers must be set up because otherwise the transceiver will
> be shorted. I have configured it with 1 speaker and 2 speakers and HI CURR
> always appears. Who can help me with a solution to this problem? Sincerely,
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]