muting audio on PSK
Locked
 
|
Hi folks
I need a little help. I am using the K3 on PSK a lot. I turn the audio gain to zero and that mutes received audio. However, I cannot find a way to mute the transmit audio (annoying whine). I have rear and reread the manual and cannot find any help. Does anyone know how to mute transmit audio on PSK? tu Paul, NU4C ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Could this be the Monitor Gain?
Try pressing the bottom right knob to the left of the VFO for about a half second (HOLD time), the VFO B area should say "MON xx" where xx is a number, and rotate the knob to a lower setting. This knob is also used for compression, transmit power, etc. 73 de Dick, K6KR -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Paul Milward Sent: Wednesday, December 22, 2010 8:01 AM To: elecraft reflector Subject: [Elecraft] muting audio on PSK Hi folks I need a little help. I am using the K3 on PSK a lot. I turn the audio gain to zero and that mutes received audio. However, I cannot find a way to mute the transmit audio (annoying whine). I have rear and reread the manual and cannot find any help. Does anyone know how to mute transmit audio on PSK? tu Paul, NU4C ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Nope
MON=0 the mystery continues nu4c ________________________________ From: Dick Dievendorff <[hidden email]> To: Paul Milward <[hidden email]>; elecraft reflector <[hidden email]> Sent: Wed, December 22, 2010 11:06:18 AM Subject: RE: [Elecraft] muting audio on PSK Could this be the Monitor Gain? Try pressing the bottom right knob to the left of the VFO for about a half second (HOLD time), the VFO B area should say "MON xx" where xx is a number, and rotate the knob to a lower setting. This knob is also used for compression, transmit power, etc. 73 de Dick, K6KR -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Paul Milward Sent: Wednesday, December 22, 2010 8:01 AM To: elecraft reflector Subject: [Elecraft] muting audio on PSK Hi folks I need a little help. I am using the K3 on PSK a lot. I turn the audio gain to zero and that mutes received audio. However, I cannot find a way to mute the transmit audio (annoying whine). I have rear and reread the manual and cannot find any help. Does anyone know how to mute transmit audio on PSK? tu Paul, NU4C ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
My XYL does not like the beadle-beadle of the BPSK, so I stick a blank
(no wiring, no shorting) stereo plug into the front "PHONES" jack. That opens the circuit and makes everyone happy. John Ragle -- W1ZI ===== On 12/22/2010 11:50 AM, Paul Milward wrote: I need a little help. I am using the K3 on PSK a lot. I turn the audio gain tozero and that mutes received audio. However, I cannot find a way to mute the transmit audio (annoying whine). I have rear and reread the manual and cannot find any help. Does anyone know how to mute transmit audio on PSK? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
In reply to this post by Paul Milward
Are you sure the TX audio isn't coming out of your PC speakers?
James K2QI Sent via BlackBerry from T-Mobile -----Original Message----- From: Paul Milward <[hidden email]> Sender: [hidden email] Date: Wed, 22 Dec 2010 08:50:38 To: elecraft reflector<[hidden email]> Subject: Re: [Elecraft] muting audio on PSK Nope MON=0 the mystery continues nu4c ________________________________ From: Dick Dievendorff <[hidden email]> To: Paul Milward <[hidden email]>; elecraft reflector <[hidden email]> Sent: Wed, December 22, 2010 11:06:18 AM Subject: RE: [Elecraft] muting audio on PSK Could this be the Monitor Gain? Try pressing the bottom right knob to the left of the VFO for about a half second (HOLD time), the VFO B area should say "MON xx" where xx is a number, and rotate the knob to a lower setting. This knob is also used for compression, transmit power, etc. 73 de Dick, K6KR -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Paul Milward Sent: Wednesday, December 22, 2010 8:01 AM To: elecraft reflector Subject: [Elecraft] muting audio on PSK Hi folks I need a little help. I am using the K3 on PSK a lot. I turn the audio gain to zero and that mutes received audio. However, I cannot find a way to mute the transmit audio (annoying whine). I have rear and reread the manual and cannot find any help. Does anyone know how to mute transmit audio on PSK? tu Paul, NU4C ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
--... ...-- -.. . .--- .- -- . ...
|
|
|
In reply to this post by Paul Milward
1) Are you sure it's coming out of the K3 and not the sound card?
2) Does transmitter power affect it? Wes N7WS --- On Wed, 12/22/10, Paul Milward <[hidden email]> wrote: > From: Paul Milward <[hidden email]> > Subject: Re: [Elecraft] muting audio on PSK > To: "elecraft reflector" <[hidden email]> > Date: Wednesday, December 22, 2010, 9:50 AM > Nope > MON=0 > the mystery continues > nu4c > > > > > ________________________________ > Could this be the Monitor Gain? > > Try pressing the bottom right knob to the left of the VFO > for about a half > second (HOLD time), the VFO B area should say "MON xx" > where xx is a number, > and rotate the knob to a lower setting. This knob is also > used for > compression, transmit power, etc. > > 73 de Dick, K6KR > > > -----Original Message----- > > Hi folks > I need a little help. I am using the K3 on PSK a lot. I > turn the audio gain > to > zero and that mutes received audio. However, I cannot find > a way to mute the > > transmit audio (annoying whine). I have rear and reread the > manual and > cannot > find any help. > Does anyone know how to mute transmit audio on PSK? > tu > Paul, NU4C ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
tnx for all the responses
I have a pair of stereo speakers connected to the back of the K3. I also have a Yamaha headset connected, both the speakers and headset are always active. This setup allows me to monitor from across the room and also to rapidly access the headset when necessary. Obviously I do not need audio for PSK. Received audio is easily silenced by setting audio gain to zero, but transmit audio is always present regardless of the Power setting. The MON=0 and the audio is produced in the k3 not the computer. I use a pair of stereo cables from the I/O on the back of the rig to the (audio) I/O on the laptop ________________________________ From: Wes Stewart <[hidden email]> To: elecraft reflector <[hidden email]>; Paul Milward <[hidden email]> Sent: Wed, December 22, 2010 12:20:32 PM Subject: Re: [Elecraft] muting audio on PSK 1) Are you sure it's coming out of the K3 and not the sound card? 2) Does transmitter power affect it? Wes N7WS --- On Wed, 12/22/10, Paul Milward <[hidden email]> wrote: > From: Paul Milward <[hidden email]> > Subject: Re: [Elecraft] muting audio on PSK > To: "elecraft reflector" <[hidden email]> > Date: Wednesday, December 22, 2010, 9:50 AM > Nope > MON=0 > the mystery continues > nu4c > > > > > ________________________________ > Could this be the Monitor Gain? > > Try pressing the bottom right knob to the left of the VFO > for about a half > second (HOLD time), the VFO B area should say "MON xx" > where xx is a number, > and rotate the knob to a lower setting. This knob is also > used for > compression, transmit power, etc. > > 73 de Dick, K6KR > > > -----Original Message----- > > Hi folks > I need a little help. I am using the K3 on PSK a lot. I > turn the audio gain > to > zero and that mutes received audio. However, I cannot find > a way to mute the > > transmit audio (annoying whine). I have rear and reread the > manual and > cannot > find any help. > Does anyone know how to mute transmit audio on PSK? > tu > Paul, NU4C Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
Paul, Are you aware that the MON level is saved on a per mode basis? Did you check MON while in Data mode (assuming you are using DATA A for PSK31)? 73, ... Joe, W4TV On 12/22/2010 5:04 PM, Paul Milward wrote: > tnx for all the responses > I have a pair of stereo speakers connected to the back of the K3. I also have a > Yamaha headset connected, both the speakers and headset are always active. This > setup allows me to monitor from across the room and also to rapidly access the > headset when necessary. Obviously I do not need audio for PSK. Received audio is > easily silenced by setting audio gain to zero, but transmit audio is always > present regardless of the Power setting. The MON=0 and the audio is produced in > the k3 not the computer. > I use a pair of stereo cables from the I/O on the back of the rig to the (audio) > I/O on the laptop > > > > > ________________________________ > From: Wes Stewart<[hidden email]> > To: elecraft reflector<[hidden email]>; Paul Milward > <[hidden email]> > Sent: Wed, December 22, 2010 12:20:32 PM > Subject: Re: [Elecraft] muting audio on PSK > > 1) Are you sure it's coming out of the K3 and not the sound card? > > 2) Does transmitter power affect it? > > Wes N7WS > > --- On Wed, 12/22/10, Paul Milward<[hidden email]> wrote: > >> From: Paul Milward<[hidden email]> >> Subject: Re: [Elecraft] muting audio on PSK >> To: "elecraft reflector"<[hidden email]> >> Date: Wednesday, December 22, 2010, 9:50 AM >> Nope >> MON=0 >> the mystery continues >> nu4c >> >> >> >> >> ________________________________ > >> Could this be the Monitor Gain? >> >> Try pressing the bottom right knob to the left of the VFO >> for about a half >> second (HOLD time), the VFO B area should say "MON xx" >> where xx is a number, >> and rotate the knob to a lower setting. This knob is also >> used for >> compression, transmit power, etc. >> >> 73 de Dick, K6KR >> >> >> -----Original Message----- > >> >> Hi folks >> I need a little help. I am using the K3 on PSK a lot. I >> turn the audio gain >> to >> zero and that mutes received audio. However, I cannot find >> a way to mute the >> >> transmit audio (annoying whine). I have rear and reread the >> manual and >> cannot >> find any help. >> Does anyone know how to mute transmit audio on PSK? >> tu >> Paul, NU4C > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
|
|
ta daaaa!
I knew there had to be a simple fix Thank you Joe and also thanks to everyone else for their input I now have quiet XMIT and a happy XYL 73 Paul, NU4C ________________________________ From: "Joe Subich, W4TV" <[hidden email]> To: [hidden email]; [hidden email] Sent: Wed, December 22, 2010 5:48:24 PM Subject: Re: [Elecraft] muting audio on PSK Paul, Are you aware that the MON level is saved on a per mode basis? Did you check MON while in Data mode (assuming you are using DATA A for PSK31)? 73, ... Joe, W4TV On 12/22/2010 5:04 PM, Paul Milward wrote: > tnx for all the responses > I have a pair of stereo speakers connected to the back of the K3. I also have a > Yamaha headset connected, both the speakers and headset are always active. This > setup allows me to monitor from across the room and also to rapidly access the > headset when necessary. Obviously I do not need audio for PSK. Received audio >is > easily silenced by setting audio gain to zero, but transmit audio is always > present regardless of the Power setting. The MON=0 and the audio is produced in > the k3 not the computer. > I use a pair of stereo cables from the I/O on the back of the rig to the >(audio) > I/O on the laptop > > > > > ________________________________ > From: Wes Stewart<[hidden email]> > To: elecraft reflector<[hidden email]>; Paul Milward > <[hidden email]> > Sent: Wed, December 22, 2010 12:20:32 PM > Subject: Re: [Elecraft] muting audio on PSK > > 1) Are you sure it's coming out of the K3 and not the sound card? > > 2) Does transmitter power affect it? > > Wes N7WS > > --- On Wed, 12/22/10, Paul Milward<[hidden email]> wrote: > >> From: Paul Milward<[hidden email]> >> Subject: Re: [Elecraft] muting audio on PSK >> To: "elecraft reflector"<[hidden email]> >> Date: Wednesday, December 22, 2010, 9:50 AM >> Nope >> MON=0 >> the mystery continues >> nu4c >> >> >> >> >> ________________________________ > >> Could this be the Monitor Gain? >> >> Try pressing the bottom right knob to the left of the VFO >> for about a half >> second (HOLD time), the VFO B area should say "MON xx" >> where xx is a number, >> and rotate the knob to a lower setting. This knob is also >> used for >> compression, transmit power, etc. >> >> 73 de Dick, K6KR >> >> >> -----Original Message----- > >> >> Hi folks >> I need a little help. I am using the K3 on PSK a lot. I >> turn the audio gain >> to >> zero and that mutes received audio. However, I cannot find >> a way to mute the >> >> transmit audio (annoying whine). I have rear and reread the >> manual and >> cannot >> find any help. >> Does anyone know how to mute transmit audio on PSK? >> tu >> Paul, NU4C > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html |
«
Return to [K3]
|
1 view|%1 views
| Free forum by Nabble | Edit this page |