my new k2

[Chris-584]

hi im on k2 no 4 sno 6436 i have just compleated the inventory of all parts
and im happy to report they are all there. i see 2sc2166 has been replaced
is there any inprovements to this change. oh just for the records i was
daft enough to let 3 k2s slip though my hands over the years. this one im
keeping with this one i have the acc's ssb unit ,nb, atu, 160m, i my try
the dsp unit hoe do you guys rate it hopefully later this year i will have
a k3 as well oh yes i love building k2s better still useing them portable
chris g0wfh k2 5436 soon k3 sno ++++
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Tom Arntzen-2]

Hi Chris.
I find the DSP to be a must have item.
On ssb the correct setting would quiet the rx to such exstent that you dont
need the squelch to monitor a frequency.
Same apply to cw and in same time you have the abillity to narrow down
bandwith.
One area where I find most useful is in digital modes.
We know the xtal filters in the K2 can shift by couple of 10hz making psk31
a little difficult to do if you not doing it the right way ,
so I use for psk and rtty my K2 set for OP1 in rx which is the same filter
for tx.
I then narrow the bandwith with the dsp.
Just set up the dsp with the center frequency of your choice and program 4
bw where I suggest af1 to be full bw.
Workes like a charm.
The K2 is actually a very good psk31 radio.
Tom LA1PHA

----- Original Message -----
From: "Chris" <[hidden email]>
To: <[hidden email]>
Sent: Wednesday, March 12, 2008 10:55 PM
Subject: [Elecraft] my new k2


hi im on k2 no 4 sno 6436 i have just compleated the inventory of all parts
and im happy to report they are all there. i see 2sc2166 has been replaced
is there any inprovements to this change. oh just for the records i was
daft enough to let 3 k2s slip though my hands over the years. this one im
keeping with this one i have the acc's ssb unit ,nb, atu, 160m, i my try
the dsp unit hoe do you guys rate it hopefully later this year i will have
a k3 as well oh yes i love building k2s better still useing them portable
chris g0wfh k2 5436 soon k3 sno ++++
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com




--
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.518 / Virus Database: 269.21.7/1327 - Release Date: 12.03.2008
13:27



--
Jeg bruker gratisversjonen av SPAMfighter for privatbrukere.
 Den har fjernet 338 søppelpostmeldinger til nå.
Betalende brukere har ikke denne meldingen i e-postene sine.
Få tak i SPAMfighter gratis her: http://www.spamfighter.com/lno


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[DW Holtman]

Hello,

A few weeks ago, someone posted a procedure for reseting a K2. It was a
sequence something like holding the 4,5 and 6 buttons while powering up.

What is the sequence? Does it reset everything, filters, sidetone etc to
it's factory settings? I could not find it in the manual or in the archives.

Thank you in advance for your help.

Best,
DW Holtman
WB7SSN

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Dave Andrus-3]

You've got it--

1. Turn the K2 off.
2. Hold down the 4, 5, and 6 keys
3. Turn the K2 back on.

The EEPROM will be re-written with the factory defaults for all  
settings, which will require that you re-run all of the calibration  
functions again.

BTW, it's on Page 106 of the manual.

73,

Dave K7DAA
http://www.k7daa.com

On Mar 25, 2008, at 8:37 PM, DW Holtman wrote:

> Hello,
>
> A few weeks ago, someone posted a procedure for reseting a K2. It  
> was a sequence something like holding the 4,5 and 6 buttons while  
> powering up.
>
> What is the sequence? Does it reset everything, filters, sidetone  
> etc to it's factory settings? I could not find it in the manual or  
> in the archives.
>
> Thank you in advance for your help.
>
> Best,
> DW Holtman
> WB7SSN
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com