need more power for x-verter

[Werner Hasemann]

Hello,
I would like to run my XV432 transverter with 100 to 250 mW from the K3 with the transverter-option. Did not find a solution in the handbook. Any good ideas ?
Thanks Werner DJ9KH
--
Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 -
sicherer, schneller und einfacher! http://portal.gmx.net/de/go/atbrowser
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Werner,

That higher level is not available from the KXV3, but 0 dBm  (1 mW) is
available.
I am wondering why you do not plug the XV432 for the -20 to 0 dBm range
and operate with the KXV3.  You must have reasons other than the K3 for
making your choice of input power.
The only reason I can think of is that you are also using another
(non-Elecraft) transceiver as an IF in addition to the K3.
If you are using isolated input/output lines on another other IF
transceiver, put a 24 dB attenuator in the transmit IF input to drop the
250 mW level down to 0 dBm.

73,
Don W3FPR

Werner Hasemann wrote:
> Hello,
> I would like to run my XV432 transverter with 100 to 250 mW from the K3 with the transverter-option. Did not find a solution in the handbook. Any good ideas ?
> Thanks Werner DJ9KH
>  
>  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html