no led on rf out put

[bkp]

Have no led's on transmit on 100 watts an only one after pa is off , also just 15 amp draw on 20m to 10m , full 20 amp draw on 40m to 160m 0n dumpy load , kta100 locks up on dumpy load what's up with this also there was some close by lighting hits the other night? 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

What Elecraft product? - Please help by putting K1, K2, K3, XG2, N-Gen,
etc. at the start of the subject line.  Which LEDs?
There is no kta100 in the Elecraft product line, but there is a KAT100 -
is that what you meant?.

Sorry for the questions, but we have to have a more complete description
of your problem before we can provide any intelligent answer.

73,
Don W3FPR

On 1/7/2012 12:23 PM, bryan puckett wrote:
> Have no led's on transmit on 100 watts an only one after pa is off , also just 15 amp draw on 20m to 10m , full 20 amp draw on 40m to 160m 0n dumpy load , kta100 locks up on dumpy load what's up with this also there was some close by lighting hits the other night?
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html