(no subject)

[Don Greenbaum-2]

I'm setting up WSJT using an external USB Codec device (RigExpert Standard).

The identical setup works fine with my IC7600.

However, I can't get Audio output on the K3.   I've tried all the Mic Sel settings in the main menu, Line In, rp.L FP.L etc.  None seem to work.

I've also given up on the Rig Expert for audio and used the computers internal sound card, going from the line out of the sound card to the line in.

Am I missing the obvious?

Don
N1DG

-----------------------------------------------------
N1DG--Licensed since 1962
EX-WB2DND, A61AD (GUEST OP, QSL MGR), A52DG, /KH9, /BV, /VS6, /4X, /9V
Pilot: VU7RG, 3Y0X, VK9ML, D68C, VK0IR, K8XP/KH9, 9M0C, ZK1XXP, ZL9CI
Webmaster:  BS7H, 3Y0X, K5K, A52A, VK0IR, 9M0C, ZK1XXP, WB2DND/KH9, BQ9P, ZL9CI
QSL Manager:  A61AD, A61AO, A61X, A61AQ
2006 inductee into the CQ Magazine DX Hall of Fame
Member:  FOC, ARRL, DDXA, YCCC

SKYPE:  aurumtel

 
Please consider the environment before printing this email



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[KK7P]

> I'm setting up WSJT using an external USB Codec device (RigExpert Standard).

I run digital modes using a RigExpert Plus, LINE IN, set the Rig Expert
for *maximum* output level for Tx.

Try a different program than WSJT and be sure you are getting audio from
the PC to the K3 Tx audio input.

73,

Lyle KK7P

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Greenbaum-2]

RTTY has worked perfectly since day one.  That's what's so frustrating.

Don
N1DG

At 06:52 PM 7/27/2009, Lyle Johnson wrote:
>>I'm setting up WSJT using an external USB Codec device (RigExpert Standard).
>
>I run digital modes using a RigExpert Plus, LINE IN, set the Rig Expert for *maximum* output level for Tx.
>
>Try a different program than WSJT and be sure you are getting audio from the PC to the K3 Tx audio input.
>
>73,
>
>Lyle KK7P


-----------------------------------------------------
N1DG--Licensed since 1962
EX-WB2DND, A61AD (GUEST OP, QSL MGR), A52DG, /KH9, /BV, /VS6, /4X, /9V
Pilot: VU7RG, 3Y0X, VK9ML, D68C, VK0IR, K8XP/KH9, 9M0C, ZK1XXP, ZL9CI
Webmaster:  BS7H, 3Y0X, K5K, A52A, VK0IR, 9M0C, ZK1XXP, WB2DND/KH9, BQ9P, ZL9CI
QSL Manager:  A61AD, A61AO, A61X, A61AQ
2006 inductee into the CQ Magazine DX Hall of Fame
Member:  FOC, ARRL, DDXA, YCCC

SKYPE:  aurumtel

 
Please consider the environment before printing this email



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html