(no subject)

[James Caruthers]

I am in the early stages of a K2 build doing the Part 1 tests.  When I push in the power switch I can hear the relays click but I have to cycle the power button a second time to get it to turn on.  After that it works fine for a few minutes and then the display locks and I can not shift functions.  I have visually checked everything and don't see any bad solders of components out of place.  Any suggestions as to where I can look for the problem?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-4]

Look more closely for that bad solder connection or unsoldered
connection.  If possible, have someone else look at it, often another
person can spot something we have overlooked many times.

73,
Don W3FPR

James Caruthers wrote:
> I am in the early stages of a K2 build doing the Part 1 tests.  When I push in the power switch I can hear the relays click but I have to cycle the power button a second time to get it to turn on.  After that it works fine for a few minutes and then the display locks and I can not shift functions.  I have visually checked everything and don't see any bad solders of components out of place.  Any suggestions as to where I can look for the problem?
>
>  
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com