(no subject)

[Hisashi T Fujinaka]

Well that was pleasant. I was making a band change (chasing W1AW/3 and
W1AW/9) and my P3 with P3SVGA went into a screen that said something
like "Ready to load Firmware." I tried to load the firmware but at the
power-cycle I got the screen:

=====

****  FATAL ERROR  ****
In: ddc_set_coef()
span=0

Press any active key to escape

=====

I tried again, and the same screen appeared.

None of the keys did a thing. So I power cycled again and saw the same
screen. I thought removing the P3SVGA might help but reloading and
resetting gave the same error.

What next?

Thanks.

--
Hisashi T Fujinaka - [hidden email]
BSEE(6/86) + BSChem(3/95) + BAEnglish(8/95) + MSCS(8/03) + $2.50 = latte
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Alan Bloom-2]

Try a parameter initialization.  While holding the LABELS key, tap the
POWER switch, which will turn the P3 on if it was off.  After about 2
seconds you should see "CONFIGURATION RESET" on the screen and you can
release the LABELS key.

Alan N1AL


On 06/24/2014 08:33 PM, Hisashi T Fujinaka wrote:

> Well that was pleasant. I was making a band change (chasing W1AW/3 and
> W1AW/9) and my P3 with P3SVGA went into a screen that said something
> like "Ready to load Firmware." I tried to load the firmware but at the
> power-cycle I got the screen:
>
> =====
>
> ****  FATAL ERROR  ****
> In: ddc_set_coef()
> span=0
>
> Press any active key to escape
>
> =====
>
> I tried again, and the same screen appeared.
>
> None of the keys did a thing. So I power cycled again and saw the same
> screen. I thought removing the P3SVGA might help but reloading and
> resetting gave the same error.
>
> What next?
>
> Thanks.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]