(no subject)

[Edward R Cole]

Jim and any others interested:

http://www.amsat.org/?p=1489

An article written in 1994 on the principle I was alluding
to.  Way-back in 1999, AA2TX wrote Instatune which performed this for
the FT-847.  KB5MU writes in 1999 that several other programs have
this feature (but the link is broken to the Amsat Store).  Currently
Amsat offers: MacDoppler and SatPC32 (which I already have).
http://store.amsat.org/catalog/index.php?cPath=2

I'll have to check to see if it is implemented in SatPC32 (what
radios are supported).  But most likely it does not support control
of either the K3 or KX3.  Software mavens most likely can easily make
a driver that will work with SatPC32.

73, Ed - KL7uW

From: Jim Rogers <[hidden email]>
To: Edward R Cole <[hidden email]>, [hidden email]
Subject: Re: [Elecraft] Fwd: Re: Full duplex for Sat work?
Message-ID: <[hidden email]>
Content-Type: text/plain; charset=windows-1252; format=flowed

I believe the software is available on the AMSAT website and if you sign
up for AMSAT membership they will allow the download and send a CD of
the available software etc.

Jim, W4ATK


On 8/17/2015 8:08 PM, Edward R Cole wrote:
 >
 >> Date: Mon, 17 Aug 2015 12:41:45 -0800
 >> To: Elecraft Reflector
 >> From: Edward R Cole <[hidden email]>
 >> Subject: Re: [Elecraft] Full duplex for Sat work?
 >>
 >> Jerry,
 >>
 >> Its tempting to think maybe the sub-Rx could be used duplex with
 >> main-Tx in the K3, but as you discovered its not possible as DSP is
 >> in use for Tx or Rx, but not both simultaneously.
 >>
 >> There is a kind of solution, though, if you own both K3 and KX3:
 >>
 >> Set K3-2M to listen on 145-MHz and use K3 with 432 transverter to
 >> transmit 435 (or vice versa).  The "big" issue is linking frequency
 >> control of both radios for tracking Doppler changes. This will take
 >> sw via ports in each radio.
 >> This will be a third-party sw source an not "likely" accomplished
 >> thru firmware updates. Amsat has had what they call the "One true way
 >> of tracking"; have to research that to find out if it still exists.
 >>
 >> I know a ham that might develop such sw but have not contacted him,
 >> as yet.
 >>
 >> 73, Ed - KL7UW

From: Jim Rogers <[hidden email]>
To: Edward R Cole <[hidden email]>, [hidden email]
Subject: Re: [Elecraft] Fwd: Re: Full duplex for Sat work?
Message-ID: <[hidden email]>
Content-Type: text/plain; charset=windows-1252; format=flowed

I believe the software is available on the AMSAT website and if you sign
up for AMSAT membership they will allow the download and send a CD of
the available software etc.

Jim, W4ATK


On 8/17/2015 8:08 PM, Edward R Cole wrote:
 >
 >> Date: Mon, 17 Aug 2015 12:41:45 -0800
 >> To: Elecraft Reflector
 >> From: Edward R Cole <[hidden email]>
 >> Subject: Re: [Elecraft] Full duplex for Sat work?
 >>
 >> Jerry,
 >>
 >> Its tempting to think maybe the sub-Rx could be used duplex with
 >> main-Tx in the K3, but as you discovered its not possible as DSP is
 >> in use for Tx or Rx, but not both simultaneously.
 >>
 >> There is a kind of solution, though, if you own both K3 and KX3:
 >>
 >> Set K3-2M to listen on 145-MHz and use K3 with 432 transverter to
 >> transmit 435 (or vice versa).  The "big" issue is linking frequency
 >> control of both radios for tracking Doppler changes. This will take
 >> sw via ports in each radio.
 >> This will be a third-party sw source an not "likely" accomplished
 >> thru firmware updates. Amsat has had what they call the "One true way
 >> of tracking"; have to research that to find out if it still exists.
 >>
 >> I know a ham that might develop such sw but have not contacted him,
 >> as yet.
 >>
 >> 73, Ed - KL7UW


From: Jim Rogers <[hidden email]>
To: Edward R Cole <[hidden email]>, [hidden email]
Subject: Re: [Elecraft] Fwd: Re: Full duplex for Sat work?
Message-ID: <[hidden email]>
Content-Type: text/plain; charset=windows-1252; format=flowed

I believe the software is available on the AMSAT website and if you sign
up for AMSAT membership they will allow the download and send a CD of
the available software etc.

Jim, W4ATK


On 8/17/2015 8:08 PM, Edward R Cole wrote:
 >
 >> Date: Mon, 17 Aug 2015 12:41:45 -0800
 >> To: Elecraft Reflector
 >> From: Edward R Cole <[hidden email]>
 >> Subject: Re: [Elecraft] Full duplex for Sat work?
 >>
 >> Jerry,
 >>
 >> Its tempting to think maybe the sub-Rx could be used duplex with
 >> main-Tx in the K3, but as you discovered its not possible as DSP is
 >> in use for Tx or Rx, but not both simultaneously.
 >>
 >> There is a kind of solution, though, if you own both K3 and KX3:
 >>
 >> Set K3-2M to listen on 145-MHz and use K3 with 432 transverter to
 >> transmit 435 (or vice versa).  The "big" issue is linking frequency
 >> control of both radios for tracking Doppler changes. This will take
 >> sw via ports in each radio.
 >> This will be a third-party sw source an not "likely" accomplished
 >> thru firmware updates. Amsat has had what they call the "One true way
 >> of tracking"; have to research that to find out if it still exists.
 >>
 >> I know a ham that might develop such sw but have not contacted him,
 >> as yet.
 >>
 >> 73, Ed - KL7UW


73, Ed - KL7UW
http://www.kl7uw.com
     "Kits made by KL7UW"
Dubus Mag business:
     [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]