(no subject)

[Edward R Cole]

For ideas on how to use TX INHIBIT:
http://www.kl7uw.com/TX-INHIBIT.htm

I do exactly as Don suggests; connect KEYOUT to sequencer input and
last stage of sequencer is "K4" shown in the Inhibit diagram on my webpage.

For ideas on building your computer/radio I/F:
http://www.kl7uw.com/Digital_I-F.htm

73, ED - KL7UW


From: Don Wilhelm <[hidden email]>
To: [hidden email]
Subject: Re: [Elecraft] Default K3 transmit delay may be too short for
         slow QRO amplifiers
Message-ID: <[hidden email]>
Content-Type: text/plain; charset=utf-8; format=flowed

With the Elecraft gear (starting with the K3), a sequencer can be
started with the KEYOUT output and RF held off by TX INHibit until the
sequencer completes.
Of course, there are other methods, but to my mind, that is the most
"automatic" method - you operate the transceiver as normal and it "just
happens".

73,
Don W3FPR


73, Ed - KL7UW
   http://www.kl7uw.com
Dubus-NA Business mail:
   [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]