pactor on k3

[ussv dharma]

Aloha:
 Prior to sending k3 to elecraft for updating I worked Pactor with no problems.

 Multi connector of Pactor Modem  .....to "RS232" on back of k3
RCA Ptt of Modem..............................to PTT IN on back of k3
Audio of Pactor Modem.......................to line in (stereo) on back of K3

Now however, I can still do psk31 with no problem, but can not get any output when trying to use pactor. I hear everything swithcing, but no power out


COMMENTS>>.....HELP


 
If you don't change direction you WILL arrive exactly where you're headed!!
 
Susan Meckley, Skipper W7KFI-mm  AFA9SM
                         USSV DHARMA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jeff Cochrane - VK4XA]

CONTENTS DELETED

The author has deleted this message.

[ussv dharma]

My mistake in typing....it is in the "out" jack of the k3....sorry.

 
If you don't change direction you WILL arrive exactly where you're headed!!
 
Susan Meckley, Skipper W7KFI-mm  AFA9SM
                         USSV DHARMA
 


________________________________
From: Jeff Cochrane - VK4BOF <[hidden email]>
To: ussv dharma <[hidden email]>; [hidden email]
Sent: Saturday, October 1, 2011 10:50 PM
Subject: Re: [Elecraft] pactor on k3

Change the audio lead to Line Out on the K3.
That *should* fix the issue.


73 de
Jeff Cochrane - VK4BOF
East Innisfail
QLD, Australia
K3 #4257, KPA500 #161, P3 #1216

----- Original Message ----- From: "ussv dharma" <[hidden email]>
To: <[hidden email]>
Sent: Sunday, October 02, 2011 6:21 PM
Subject: [Elecraft] pactor on k3


Aloha:
Prior to sending k3 to elecraft for updating I worked Pactor with no problems.

Multi connector of Pactor Modem .....to "RS232" on back of k3
RCA Ptt of Modem..............................to PTT IN on back of k3
Audio of Pactor Modem.......................to line in (stereo) on back of K3

Now however, I can still do psk31 with no problem, but can not get any output when trying to use pactor. I hear everything swithcing, but no power out


COMMENTS>>.....HELP



If you don't change direction you WILL arrive exactly where you're headed!!

Susan Meckley, Skipper W7KFI-mm AFA9SM
USSV DHARMA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[hb9brj]

Did you check the K3's SYNC DATA function described in the AMTOR/PACTOR section of the manual?

The K3’s SYNC DATA feature can be used to
minimize T-R delays (it forces the same crystal
filter to be used for both receive and transmit).
Locate CONFIG:SYNC DT. Assign it to a
programmable function (e.g., by holding PF1 ),
then exit the menu.

73, Markus HB9BRJ / AE6MG

[oe9fwv]

CONTENTS DELETED

The author has deleted this message.

[oe9fwv]

hi Susan,

I have been sending an answer twice, and have seen that it arrives as an empty posting on the list.
I have no idea why this happens, but I try again - this time with a cc to myself to check my mail system.

I wrote:

PTT to PTT in RCA connector
RX Audio - Line out RCA (stereo)
TX Audio - Line in RCA (mono)


Transceiver Control Connector
TxD-V24 (pin 13) -> RS232 pin 2
RxD-V24 (pin 17) -> RS232 pin 3
TGND - (pin 18) -> RS232 pin 5


When you have your cables right and get no mod out you have to check the microphone and Line settings in your K3.
Mode is DATA A, USB
Menu Function Sync DT -S on


Menu Mic Sel Line in


I suspect you have the mic selector wrong or Line gain turned low.
When you adjust Mic Gain, "Line"  should appear in the K3 display.


73!
Werner oe9fwv

--
Going the speed of light is bad for your age.


Email powered by Pegasus Mail free at <http://www.pmail.com>
Homepage: <http://www.qsl.net/oe9fwv/>
Fone [phone]
Fax [phone]
Mobile [phone]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ussv dharma]

Stupid me....operator head space...one of the cables from the pactor modem not connected.....thank you peoples...you got me on the right track..pactor now working.

 
If you don't change direction you WILL arrive exactly where you're headed!!
 
Susan Meckley, Skipper W7KFI-mm  AFA9SM
                         USSV DHARMA
 


________________________________
From: Dr. Werner Furlan <[hidden email]>
To: ussv dharma <[hidden email]>
Cc: [hidden email]
Sent: Sunday, October 2, 2011 7:31 AM
Subject: Re: [Elecraft] pactor on k3


 
hi Susan,

PTT to PTT in RCA connector
RX Audio - Line out RCA (stereo)
TX Audio - Line in RCA (mono)

Transceiver Control Connector
TxD-V24 (pin 13) -> RS232 pin 2
RxD-V24 (pin 17) -> RS232 pin 3
TGND - (pin 18) -> RS232 pin 5

When you have your cables right and get no mod out you have to check the microphone and
Line settings in your K3.
Mode is DATA A, USB
Menu Function Sync DT -S on

Menu Mic Sel Line in

I suspect you have the mic selector wrong or Line gain turned low.
When you adjust Mic Gain, "Line"  should appear in the K3 display.

73!
Werner oe9fwv


ussv dharma schrieb am 2 Oct 2011 um 1:21:

> Aloha:
>  Prior to sending k3 to elecraft for updating I worked Pactor with no problems.
>
>  Multi connector of Pactor Modem  .....to "RS232" on back of k3
> RCA Ptt of Modem..............................to PTT IN on back of k3
> Audio of Pactor Modem.......................to line in (stereo) on back of K3
>
> Now however, I can still do psk31 with no problem, but can not get any output when trying to use pactor. I hear everything swithcing, but no power out
>
>
> COMMENTS>>.....HELP
>
>
>  
> If you don't change direction you WILL arrive exactly where you're headed!!
>  
> Susan Meckley, Skipper W7KFI-mm  AFA9SM
>                          USSV DHARMA
>

--
The problem with being in the middle of the road is that you tend to get run over.

Email powered by Pegasus Mail free at < http://www.pmail.com >
Homepage: http://www.qsl.net/oe9fwv/
Fone [phone]
Mobile  [phone]
Fax: [phone]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html