(phase signals RE: SDR IQ/IF Questions

[Edward R Cole]

From: Wes Stewart <[hidden email]>
"The LP-Pan works well with a decent soundcard, but suffers from the
use of PowerSDR software, which is simply awful in my opinion, and
lots of cabling."

Spectravue runs with the LP-Pan just fine.  I am using the
recommended emu-0202 soundcard with a single LP-Pan.  The emu
connects with a USB and requires two audio cables to the LP-Pan.  The
LP-Pan uses a BNC coax cable to the K3 IF.  One one more connector
for 12v.  That is more than the coax plus USB cable for the SDR-IQ,
but I do not see what the big deal is.  But then if you saw the
wiring in my shack you would understand that comment.

For dual-receive I use the M-Audio Delta-44 soundcard which has four
audio cables and a sub-D15 cable to the computer.  But this is not a
standard application.




73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 144-1.4kw, 432-100w, 1296-testing*, 3400-winter?
DUBUS Magazine USA Rep [hidden email]
======================================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[AB3LS]

Thank you for all of the replies everyone!

You have answered all of my questions and some of you have gone further!

Consider this topic finished!

Thanks!

Geoffrey Wolf
AB3LS – Amateur Radio Callsign
University of Pittsburgh ‘14
[hidden email]
[hidden email]
[phone]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html