pro audio engineering power supply for kx3 installing rf choke

[rwwatson]

Good morning listers,
I am a new (back after 20 years) ham and just received my power supply
from pro audio. I am visually impaired and wanted to know the best way
to open the rf choke that was included for the power supply cable.
thanks for any advice. Looking forward for my kx3 arriving next week!
thanks and 73
n3gms
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[N9YB]

I wouldn't open it and risk causing an issue.  They are fantastically engineered devices and won't give you a bit of RF interference.


Mike
N9YB

>Good morning listers,
>I am a new (back after 20 years) ham and just received my power supply
>from pro audio. I am visually impaired and wanted to know the best way
>to open the rf choke that was included for the power supply cable.
>thanks for any advice. Looking forward for my kx3 arriving next week!
>thanks and 73
>n3gms

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[rwwatson]

On 12/8/18, Michael Rosenberg <[hidden email]> wrote:

> I wouldn't open it and risk causing an issue.  They are fantastically
> engineered devices and won't give you a bit of RF interference.
>
>
> Mike
> N9YB
>
>>Good morning listers,
>>I am a new (back after 20 years) ham and just received my power supply
>>from pro audio. I am visually impaired and wanted to know the best way
>>to open the rf choke that was included for the power supply cable.
>>thanks for any advice. Looking forward for my kx3 arriving next week!
>>thanks and 73
>>n3gms
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[rwwatson]

Hi Mike, I'm not talking about opening the power supply just the mix
31 Snap-It core that was included to be installed on the dc cable.
thanks and 73.

On 12/8/18, Richard watson <[hidden email]> wrote:

> On 12/8/18, Michael Rosenberg <[hidden email]> wrote:
>> I wouldn't open it and risk causing an issue.  They are fantastically
>> engineered devices and won't give you a bit of RF interference.
>>
>>
>> Mike
>> N9YB
>>
>>>Good morning listers,
>>>I am a new (back after 20 years) ham and just received my power supply
>>>from pro audio. I am visually impaired and wanted to know the best way
>>>to open the rf choke that was included for the power supply cable.
>>>thanks for any advice. Looking forward for my kx3 arriving next week!
>>>thanks and 73
>>>n3gms
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Richard,

The best way to obtain that information is to go "right to the horse's
mouth".  Send an email to Howie at [hidden email] and ask for the best
method.  You could also try [hidden email].

I strongly recommend you do it today ASAP.  Howie is in the same area I
am, and we are expecting extreme winter weather late tonight and through
Sunday (maybe Monday) which can bring ice and snow and can create
disaster to power lines, so we may  be without power for a period of time.

73,
Don W3FPR


On 12/8/2018 8:01 AM, Richard watson wrote:

> Good morning listers,
> I am a new (back after 20 years) ham and just received my power supply
> from pro audio. I am visually impaired and wanted to know the best way
> to open the rf choke that was included for the power supply cable.
> thanks for any advice. Looking forward for my kx3 arriving next week!
> thanks and 73
> n3gms
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]