Luca,
Please check the BFO frequency for CW. It must be lower than the BFO
frequency for reverse CW.
I believe you will find both are set the same. Reduce the CW BFO
frequency to the opposite sideband.
73,
Don W3FPR
[hidden email] wrote:
> dear friends
> don and tom
> I checked the rx mode in reverse cw.
> So, in reverse cw k2 works fine, like the normal mode.
> otherwise in normal mode k2 receives around 1.3 khz more down.
> all functions look working fine (xfil, dsp filters ecc...)
> I don't know il is needed to recal the radio!?!
> what do think about?
> thanks again
> luca
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.41/2277 - Release Date: 08/02/09 05:56:00
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
