question...

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

question...

n0xdb
Hello Elecraft,

  I am attempting the led and backlight installation.

  I am using the spacers 6mm and it calls for 19mm which makes no
  sense to me. It says the diffuser must be 3mm above the pc board.
  How can you use a 19mm spacer and get 3mm. WTF

  It says leads may not protrude through the board, which is fine. I
  put it on and the diffuser is 10mm above the board.

  The problem I have is does the lcd go under or over the diffuser?
  the leads dont' reach if it's over. and I don't understand how it
  could fit under.

--
Best regards,
 Foxjazz                          mailto:[hidden email]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html