re: Elecraft] digital via Tigertronics SL 1 +

[Bernard Gaffney, N8PVZ/QRP]

Basic connection between PC --> SL-1+ --> K2, in my
setup is:

   Two stereo cables from soundcard (1ea for mic in
and spkr out) to SL-1+.

   Mono cable from K2 rear spkr jack to SL-1+ rear
Spkr jack.

   RJ-45 to 8-pin round mic connector cable from SL-1+
(RJ-45 end) to K2 (8-pin connector end).  (As you are
aware, there is no provision to plug the mic into the
SL-1+).

  Information on how to configure jumper settings &
power to SL-1+ is on pgs 2-5 (most of this is on pgs
3&4) of the SL-1+ manual. You do need to know how your
mic is set up (Kenwood, Icom, etc) from the K2SB
manual. Mine was wired as a Kenwood mic, as I have an
MC-60A.

  9v batt supplies power to the rear power jack on the
SL-1+.

Sounds worse than it is, really not too difficult to
do, suggest you read pages 2-5 a couple of times
before starting the setup.

    72 de N8PVZ
      ---bernie




 
____________________________________________________________________________________
Want to start your own business?
Learn how on Yahoo! Small Business.
http://smallbusiness.yahoo.com/r-index
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com