on the <http://www.bencher.com> web site is a very good
article called "Dirty little Secrets" about antennas. It should be required reading if your considering a vertical antenna. I've used both the hustler 5btv and the Butternut 10-80m vertical with excellent results. RC <http://www.kc5wa.us> _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
I'll throw one more option into the mix...
Lately I've been using one of Force 12's Sigma 40XK vertical dipoles. This is about 16 feet tall, and since it's a center-fed dipole, it supposedly doesn't *require* a counterpoise or radial system, so I've been using it without one. This particular antenna is a vertical dipole, but depending on the band, it has T-bars at the top and bottom, so it looks like a sideways-H. On 40 and 30M, it uses small loading coils at the feedpoint with a hairpin match. On the rest of the bands, it's a direct-feed system via a supplied balun. Results have been better than expected. I have it mounted about 3 feet above ground and am working europe on 40M consistently with 100W from W6. My previous antenna was a 2L 40M yagi at about 80 feet, and of course it worked better, but what's interesting is that with the vertical, I can work guys that are in the noise for me, and sometimes so much so that I need to use the DSP just to pull them out of the noise. Other bands are consistent with the 40M results (10-40M, including WARC). The same antenna could very easily be fabricated out of wire or aluminum and have the same results. The F12 package is nice because it's a solidly-built antenna that just works out of the box. The one downside is that it requires manual intervention by the user to change bands (which means adding/removing the loading coils/hairpin and/or adjusting the length of the T-bars). There's a few articles on Cebik's website, as well as others, talking about vertical dipoles, and shortened vertical dipoles. For a portable operation, this would make a great antenna, nothing to go wrong and performance is decent. I'm planning on using it for the time being until I can get a tower and yagi stack up this spring. YMMV, Jeff N6GQ On 3/2/07, RC kc5wa <[hidden email]> wrote: > on the <http://www.bencher.com> web site is a very good > article called "Dirty little Secrets" about antennas. > It should be required reading if your considering a > vertical antenna. I've used both the hustler 5btv and > the Butternut 10-80m vertical with excellent results. > > RC <http://www.kc5wa.us> > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
In reply to this post by RC-16
RC is right! If you have any questions (or interest) at all about verticals
then READ THIS. It is an island of sanity in a sea of bs. Don K7FJ > on the <http://www.bencher.com> web site is a very good article called > "Dirty little Secrets" about antennas. It should be required reading if > your considering a vertical antenna. I've used both the hustler 5btv and > the Butternut 10-80m vertical with excellent results. > > RC <http://www.kc5wa.us> _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
In reply to this post by Jeff Kinzli N6GQ
The Force 12 vertical dipoles are Excellent, and do not require radials, as
Cebik notes in his models of vertical dipoles. A dipole is complete unto itself as a radiating antenna. In the far field , good RF earth can help this one like any antenna with its far reflections, but up close to it, it does fine with its elevated feeding. And, it is a good antenna to home brew. Stuart K5KVH _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
Free forum by Nabble | Edit this page |