re: weak reception after phase II

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

re: weak reception after phase II

Roland Whitsitt
Thanks Ken, I'll check that.  Also I noticed the S meter has 4 bars lit up all the time.  The S meter isn't moving with the voices peaks.  They are booming on another rig.  Remember, I haven't gone past phase II yet.
Okay, I'm going to pull it all apart now and check.
Roland n5vwn
flying pig #1100
================================================================
Are you getting a reading on the S meter? I was having the same problem
with #4913 and it turned out I had wired the speaker wire plug backwards,
thus shorting to ground the audio.
--
  Just my 2¢... 73 es gd dx de Ken KGØWX
        Grid EM17ip, Flying Pigs #-1055
 Proud builder & owner of Elecraft K2 #4913

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com