resetting K2 clock

[Rich Ardolino]

The clock in my K2 is running 1minute and 30 seconds fast. I've
read/followed the "Setting the Date and Time" part of the KDSP2
instructions with no luck...it just doesn't respond as it should
according to the instructions. I've also searched the archives for any
references to resetting the clock but found nothing (not saying there is
nothing there...I just couldn't find anything). Any advice/suggestions
appreciated. Thanks.

Rich  K2CPE
K2 #1102
[hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Rich,

While you are attempting to set the clock, what does it do, and what
does it not do each step of the setting procedure.  Please give more detail.

73,
Don W3FPR

Rich Ardolino wrote:

> The clock in my K2 is running 1minute and 30 seconds fast. I've
> read/followed the "Setting the Date and Time" part of the KDSP2
> instructions with no luck...it just doesn't respond as it should
> according to the instructions. I've also searched the archives for any
> references to resetting the clock but found nothing (not saying there is
> nothing there...I just couldn't find anything). Any advice/suggestions
> appreciated. Thanks.
>
> Rich  K2CPE
> K2 #1102
> [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.233 / Virus Database: 270.10.18/1937 - Release Date: 02/05/09 11:34:00
>
>  

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Rich Ardolino]

My error....I looked too fast for the clock instructions......I
downloaded the KDSP2 instructions but I don't have the DSP in my K2. I
have the KAF2.....I'll try again with the correct instructions....but
thanks to you and Don (W3FPR) for your replies.

Rich  K2CPE


Philip Carter wrote:
> It is in the DSP manual.  You must follow the directions EXACTLY.  If
> you make a mistake, you have to start all over from step 1.
>  

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html