setting filter engage frequency

[Gary Lee-2]

I was looking in the k3 utility filter config tonight, but couldn't find
where you set the frequency at which the filter is engaged.

How do you go about this?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Bandwidth.  As you dial the the DSP bandwidth using the "Width" knob to the
left of VFO A, as you cross the thresholds for the bandwidth of the filter,
different filters are switched in.

Is that the question you were asking?

Dick


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Gary Lee
Sent: Friday, March 12, 2010 5:28 PM
To: elecraft list
Subject: [Elecraft] setting filter engage frequency

I was looking in the k3 utility filter config tonight, but couldn't find
where you set the frequency at which the filter is engaged.

How do you go about this?

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dave Hachadorian]

K3 Utility / configure crystal filters / bandwidth - specify
where you want the filter to kick in.

Essentially, you are telling the K3 a lie about the filter you
are installing.

Dave Hachadorian, K6LL
Yuma, AZ
--------------------------------------------------
From: "Gary Lee" <[hidden email]>
Sent: Friday, March 12, 2010 6:27 PM
To: "elecraft list" <[hidden email]>
Subject: [Elecraft] setting filter engage frequency

> I was looking in the k3 utility filter config tonight, but
> couldn't find
> where you set the frequency at which the filter is engaged.
>
> How do you go about this?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list:
> http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html