Hello,
Please disregard my yesterday's email.
I fired up the system today and everything works, which is a surprise since no changes were made.
I have no explanation for this right now but will attempt to see if the port was shut-off; Dave-AA6YQ cautions about that from time to time. I thought I had done that operation a long time ago but maybe all the MS-updates messed that up.
Sorry to take up the bandwidth.
73 Jerry KM3K
> On February 22, 2019 at 10:39 PM JEROME SODUS <
[hidden email]> wrote:
>
>
> Hello,
>
> I want to set-up DX-Lab for two radios, namely my Yaesu FT-950 and the KX3.
>
> No problem with DX-Lab controlling the FT-950.
>
> (I do know that the KX3 has communicated with the KX3-Utility program today, so that tells me the USB connection works.)
>
> But DX-Lab and the KX3 are not talking to each other, so here are my settings for the KX3 in DX-Lab:
>
> Port....7
>
> Baud....38400
>
> Word....8
>
> Parity....N
>
> Stop....1
>
> DTR....N
>
> RTS....Y
>
> Also, in Device-Manager, flow-control is 'None'.
>
> Am I ok here or should I be looking elsewhere?
>
> TIA for any reply.
>
> 73 jerry km3k
>
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
