Howard:
> On Jan 27, 2019, at 10:29 AM, Howard Sherer <
[hidden email]> wrote:
>
> I have need to have a simple remote control of my KPA 500 for a few weeks.
> I would like to be able to remotely power up the amp. It will already be in
> the mode to power up in operate mode.
>
> I can only use an Iphone web interface to remotely power on the amp, no
> computers on either end. Any suggestions.
>
> I can do this with my RRC interface and K30, but this need if for another
> application.
The ’simplest’ approach would be to install the Remote Rig RC-1216H to connect to the RS-232 connection of the KPA500 which provides a web interface to manage the KPA500 including controlling power on/off and standby/operate. You get the same information that is available on the KPA500 front panel. This is how I control my KPA500 remotely.
See:
http://www.remoterig.com/wp/?page_id=1010 <
http://www.remoterig.com/wp/?page_id=1010> . I also use one of these to remotely control my Green Heron RT-21 rotator.
Ham Radio Outlet is a supplier for these devices.
Hope this helps,
Barry Baines, WD4ASW
(Currently in Roslindale, MA)
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]