A few years ago I needed to get a new soldering station suitable for SMT
work. Since my old station made by Weller was still going strong after some
40 years, I looked to the same brand. Almost got a WES51, but then I noticed
that I could have an 80 watt unit, WD1002, that still had a very compact
pencil (50 mm from tip to handle) and with a wide selection of very fine
tips. This unit was touted as particularly good for lead-free work, likely
to become common soon. I splurged and got this unit that is currently about
$300. Maybe overkill for an amateur, but I don't think I will need to buy
another in my lifetime. The unit consists of a WD1 power station with
digital display, a pencil stand and a WP80 pencil. 3 pushbuttons allow easy
change between 3 favorite adjustable temperatures. ESD safe of course. The
tip is connected to a jack on the power unit, and can be left floating or
connected to ground or a potential of your choosing. In today's economic
climate I might have gone for the cheaper unit, but no regrets, I enjoy this
unit every time I use it.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
