HI All,
Have been playing around in the SARTG RTTY test this weekend,
and have noticed a power problem with my K2\KPA100.
If I am on 20 or 15 mtrs, in the RTTY mode, I have little if any pwr output
control, even though the display shows 0 to 110 watts, my watt meter will
only show about 20-30 watts at most, and about the only way to adjust pwr
out (driving a linear) is to crank up a little more mic input (running a Hal DXP-38
box) but when I change bands to 80,40,10 mtrs, in the RTTY mode, works just fine,
also, if I go to 20 or 15 mtrs, and change from the RTTY mode, and switch to LSB,
I have complete power output control, this is only happening on 20 and 15 mtrs,
anybody have any ideals ??? I am at a loss ???
73 de K7ZUM
Ken in Gres"HAM" Ore
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
