(Copy of this also sent to elecraft mailing list)
Paul, mine is 0n 18.113.7 loud and clear just like a cleane tone, my
guess: 6th overtone from VFO, 18.113.7 / 6 gives 3.018 MHz and my VFO is
ranged 3.000-3.090. Possible your VFO range is not the same as mine. I
can also hear this on my portable Sangean world receiver. If I multiply
3.018 by 2, 3 and 4 etc also these frequencies is well heard on the
sangean RX. Well in that case nothing to do i guess, I just dont need
to operate around 18.113 Mc:s...
Perhaps the VFO area in the K1 should be inside some sort of shielding,
and passing thru a low-pass filter before the premix...
73 have a good day, / Chris
tis 2006-08-08 klockan 03:02 -0700 skrev Paul Gates, KD3JF:
> Krister, I hear the noise on 18.115.7 and am not sure what it is.
>
> Paul, KD3JF
> Glen Burnie, Maryland
>
> Krister Eriksson <
[hidden email]> wrote:
> Hello!
>
> I have noticed a very strong carrier in my K1 on 17 meter, I
> forgot the
> exact frequency, but around 18.113 This carrier is still there
> even
> with no antenna connected. Is this normal?
>
> Yesterday I was portable a few hours and the rig is working
> fine, but
> the condx is not very good now..
>
> 73 / SM5KRI/P Chris
>
> > End of Elecraft Digest, Vol 28, Issue 8
> > ***************************************
> --
> Krister Eriksson
> Ringduvegatan 23
> 724 70 Västerås, Sweden
>
> [Hamradio: SM5KRI]
> [
[hidden email] ]
>
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
