sub filters
Locked
 
|
Almost done with the KRX3 :)
On my main board I have all slots filled with FL1=13K FM & FL2=6K AM/ESSB FL3=2.8, FL4=1 & FL5=.250 For the Sub I don't need the AM or FM filters and I have matching 2.8, 1 & .250 filters The sub instructions say to put the widest bandwidth filters nearest FL1. Now I've got to think & that always hurts... So do I fill slots 1, 2 & 3 (with the 2.8 in slot 1)? or do I fill slots 3, 4 & 5 (with the 2.8 in slot 3)? Thanks Gary KA1J _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Gary: Either one works, just make sure you set it up in the Utility the way
you have it installed. 73, Doug VE3MV ----- Original Message ----- From: "Gary Smith" <[hidden email]> To: <[hidden email]> Sent: Saturday, January 10, 2009 4:33 PM Subject: [Elecraft] sub filters > Almost done with the KRX3 :) > > On my main board I have all slots filled with FL1=13K FM & FL2=6K > AM/ESSB FL3=2.8, FL4=1 & FL5=.250 > > For the Sub I don't need the AM or FM filters and I have matching > 2.8, 1 & .250 filters > > The sub instructions say to put the widest bandwidth filters nearest > FL1. Now I've got to think & that always hurts... > > So do I fill slots 1, 2 & 3 (with the 2.8 in slot 1)? > > or do I fill slots 3, 4 & 5 (with the 2.8 in slot 3)? > > Thanks > > Gary > KA1J > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > -- I am using the free version of SPAMfighter. We are a community of 5.8 million users fighting spam. SPAMfighter has removed 1012 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len The Professional version does not have this message _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by Gary Smith
I assume you're going to leave your main board alone.
FL1 = 13 kHz FL2 = 6.0 kHz FL3 = 2.8 kHz FL4 = 1.0 kHz FL5 = 250 Hz Were it my rig, I'd install the sub's filters in FL1-3; FL1 = 2.8 kHz FL2 = 1.0 kHz FL3 = 250 Hz UNLESS I had plans for another filter in the sub in the near future. If I thought I might acquire a 1.8 kHz for the sub real soon, I'd leave a hole for it. I think it would also work just fine to put the sub's filters in FL3, FL4, and FL5 so that FL4, for example, is the same width in both main and sub. Dick, K6KR -----Original Message----- From: [hidden email] [mailto:[hidden email]] On Behalf Of Gary Smith Sent: Saturday, January 10, 2009 1:34 PM To: [hidden email] Subject: [Elecraft] sub filters Almost done with the KRX3 :) On my main board I have all slots filled with FL1=13K FM & FL2=6K AM/ESSB FL3=2.8, FL4=1 & FL5=.250 For the Sub I don't need the AM or FM filters and I have matching 2.8, 1 & .250 filters The sub instructions say to put the widest bandwidth filters nearest FL1. Now I've got to think & that always hurts... So do I fill slots 1, 2 & 3 (with the 2.8 in slot 1)? or do I fill slots 3, 4 & 5 (with the 2.8 in slot 3)? Thanks Gary KA1J _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by Gary Smith
Thanks for the on & off list replies, I will leave 1 & 2 open.
It seemed as if that was the right thing to do for consistency of the filters as I will be using diversity extensively. After a long day, it's nice to relax without mental juggling. 73, Gary KA1J > Almost done with the KRX3 :) > > On my main board I have all slots filled with FL1=13K FM & FL2=6K > AM/ESSB FL3=2.8, FL4=1 & FL5=.250 > > For the Sub I don't need the AM or FM filters and I have matching > 2.8, 1 & .250 filters > > The sub instructions say to put the widest bandwidth filters nearest > FL1. Now I've got to think & that always hurts... > > So do I fill slots 1, 2 & 3 (with the 2.8 in slot 1)? > > or do I fill slots 3, 4 & 5 (with the 2.8 in slot 3)? > > Thanks > > Gary > KA1J > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |