Login  Register

SSB transmit issue after using K3 Utility

Posted by Mike Scott-7 on Sep 26, 2008; 7:24pm
URL: http://elecraft.85.s1.nabble.com/SSB-transmit-issue-after-using-K3-Utility-tp1121651.html

Today I used the K3 utility to adjust a crystal filter gain.
After making the adjustment to the 500Hz filter and closing the utility I
had a QSO on 40M SSB. They reported that I sounded nasal and was very
difficult to understand. After a power-off reset transmit audio returned to
normal. I have seen this situation from time to time since I have owned the
K3. I suspect but don't have a way to tell that I was transmitting through
the 500Hz filter. Listeners said it was like I was off frequency but no
amount of tuning helped.

Filters are set up as follows:
Fil 1  13.00 KHz enabled for CW, FM, AM; with Tx FM
Fil 2 6.00 KHz  enabled for CW, LSB, USB, Data, AM; with Tx AM
Fil 3  2.70 KHz  enabled for CW, LSB, USB, Data; with Tx CW and SSB
Fil 4  0.50 KHz  enabled for CW and Data, no Tx
Fil 5  Blank, nothing enabled

K3-100 #508
Utility version 1.1.6.3, standard RS232 connection
MCU 02.38
FPF 00.02
DSP1 0.190


Mike Scott - AE6WA
Tarzana, CA (DM04 / near LA)
K3-100 #508/ KX1  #1311



_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com