Posted by
Don Wilhelm-4 on
Oct 14, 2008; 12:31pm
URL: http://elecraft.85.s1.nabble.com/VFO-A-tracks-VFO-b-Help-tp1331522p1332390.html
Ted,
It has always worked like that. If you previously had VFO A and VFO B
showing different bands, I would think you had a display problem.
Currently even with the KRX3 installed, cross-band operation is not yet
implemented in the current firmware, but is being addressed as a planned
future firmware addition (only for those with the KRX3).
73,
Don W3FPR
wa6riv wrote:
> I updated my firmware and caused a problem. I have not purchased a sub
> receiver and is not installed.
> When I'm in VFO A, and do a band change, VFO B follows the same band.
> I can swap A=>B or B=>A, move from A to B or B to A.
> But I can't have VFO A on 40 meters and VFO B on 20 meters.
> The Band switch transfers both VFO's to the same band at the same time.
>
> What have I done? Tnx Ted WA6RIV
> ------------------------------------------------------------------------
>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG -
http://www.avg.com
> Version: 8.0.173 / Virus Database: 270.8.0/1722 - Release Date: 10/13/2008 7:50 AM
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com