http://elecraft.85.s1.nabble.com/VFO-A-tracks-VFO-b-Help-tp1331522p1334141.html
What a surprise! Cross band operation with 2 VFO is implemented even in my
IC7000. I thought it is available in K3 as well especially with 2 complete RX
build in.
these 2 receivers to monitor 2 bands simultaneously.
> Ted,
>
> It has always worked like that. If you previously had VFO A and VFO B
> showing different bands, I would think you had a display problem.
> Currently even with the KRX3 installed, cross-band operation is not yet
> implemented in the current firmware, but is being addressed as a planned
> future firmware addition (only for those with the KRX3).
>
> 73,
> Don W3FPR
>
> wa6riv wrote:
>> I updated my firmware and caused a problem. I have not purchased a sub
>> receiver and is not installed.
>> When I'm in VFO A, and do a band change, VFO B follows the same band.
>> I can swap A=>B or B=>A, move from A to B or B to A.
>> But I can't have VFO A on 40 meters and VFO B on 20 meters.
>> The Band switch transfers both VFO's to the same band at the same time.
>> What have I done? Tnx Ted
>> WA6RIV ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to:
[hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>
http://mailman.qth.net/mailman/listinfo/elecraft>> Help:
http://mailman.qth.net/subscribers.htm>> Elecraft web page:
http://www.elecraft.com>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG -
http://www.avg.com Version: 8.0.173 / Virus Database:
>> 270.8.0/1722 - Release Date: 10/13/2008 7:50 AM
>>
>>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):