http://elecraft.85.s1.nabble.com/VFO-A-tracks-VFO-b-Help-tp1331522p1334421.html
This is a high priority and Wayne is working on it now. But it is NOT a trivial matter
and requires a lot of code. When it's ready it will be announced on the reflector.
>What a surprise! Cross band operation with 2 VFO is implemented even in my
>IC7000. I thought it is available in K3 as well especially with 2 complete RX
>build in.
>Well I hope it will not take long to update the firmware to implement this
>feature because my K3 with KRX3 is on the way here and I was intending to use
>these 2 receivers to monitor 2 bands simultaneously.
>\
>73, Igor UA9CDC
>
>
>> Ted,
>>
>> It has always worked like that. If you previously had VFO A and VFO B
>> showing different bands, I would think you had a display problem.
>> Currently even with the KRX3 installed, cross-band operation is not yet
>> implemented in the current firmware, but is being addressed as a planned
>> future firmware addition (only for those with the KRX3).
>>
>> 73,
>> Don W3FPR
>>
>> wa6riv wrote:
>>> I updated my firmware and caused a problem. I have not purchased a sub
>>> receiver and is not installed.
>>> When I'm in VFO A, and do a band change, VFO B follows the same band.
>>> I can swap A=>B or B=>A, move from A to B or B to A.
>>> But I can't have VFO A on 40 meters and VFO B on 20 meters.
>>> The Band switch transfers both VFO's to the same band at the same time.
>>> What have I done? Tnx Ted
>>> WA6RIV ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Elecraft mailing list
>>> Post to:
[hidden email]
>>> You must be a subscriber to post to the list.
>>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>>
http://mailman.qth.net/mailman/listinfo/elecraft>>> Help:
http://mailman.qth.net/subscribers.htm>>> Elecraft web page:
http://www.elecraft.com>>> ------------------------------------------------------------------------
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG -
http://www.avg.com Version: 8.0.173 / Virus Database:
>>> 270.8.0/1722 - Release Date: 10/13/2008 7:50 AM
>>>
>>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to:
[hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>
http://mailman.qth.net/mailman/listinfo/elecraft>> Help:
http://mailman.qth.net/subscribers.htm>> Elecraft web page:
http://www.elecraft.com
>
>_______________________________________________
>Elecraft mailing list
>Post to:
[hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help:
http://mailman.qth.net/subscribers.htm>Elecraft web page:
http://www.elecraft.comSubscriber Info (Addr. Change, sub, unsub etc.):